Chemical Composition of Grades Available Easily in India

Chemical Composition / Data sheets for some common grades available in India.

Grade	C	Mn	Si	P(max)	S(max)	Cr	Ni	Mo	V	Other
EN9	0.50 – 0.60	0.50 – 0.80	0.05 – 0.35	0.03	0.03	–	–	–	–	–
EN15	0.30-0.40	1.30-1.70	0.10-0.35	0.03	0.03	–	–	–	–	–
EN16	0.3 – 0.4	1.3 – 1.8	0.10 – 0.35	0.03	0.03	–	–	0.2 – 0.35	–	–
EN18	0.35 – 0.45	0.60 – 0.95	0.10 – 0.35	0.03	0.03	0.85 – 1.15	–	–	–	–
EN19	0.35 – 0.45	0.50 – 0.80	0.10 – 0.35	0.03	0.03	0.90 – 1.40	–	0.20 – 0.40	–	–
EN24	0.35 -0.45	0.45 – 0.70	0.10 – 0.35	0.03	0.03	0.90 – 1.40	1.3 – 1.8	0.20 – 0.35	–	–
EN25	0.27 – 0.35	0.50 – 0.70	0.10 – 0.35	0.03	0.03	0.50 – 0.80	2.3 – 2.8	0.40 – 0.70	–	–
EN26	0.36-0.44	0.50-0.70	0.10-0.35	0.03	0.03	0.50-0.80	2.30-2.80	0.40-0.70	–	–
EN30	0.26 – 0.34	0.40 – 0.60	0.10 – 0.35	0.03	0.03	1.1 – 1.4	3.9 – 4.3	0.2 – 0.4	–	–
EN31	0.90 – 1.20	0.50 – 0.75	0.10 – 0.35	0.03	0.03	1.0 – 1.6	–	–	–	–
EN40	0.10-0.20	0.40-0.65	0.10-0.35	0.03	0.03	2.90-3.50	0.40 max	0.40-0.70	–	–
EN42	0.70-0.85	0.55-0.75	0.10 – 0.40	0.03	0.03	–	–	–	–	–
EN47	0.45-0.55	0.50-0.80	0.50 max	0.03	0.03	0.80-1.2	–	–	–	–
EN100	0.35-0.45	1.20-1.50	0.50 max	0.03	0.03	0.30-0.60	0.30-0.60	0.15-0.25	–	–
EN351	0.20 max	0.60-1.0	0.35 max	0.03	0.03	0.40-0.80	0.60-1.0	0.1 max	–	–
EN353	0.20 max	0.5-1.0	0.35 max	0.03	0.03	0.75-1.25	1.0-1.5	0.08-0.15	–	–
EN354	0.20 max	0.50-1.0	0.35 max	0.03	0.03	0.75-1.25	1.5-2.0	0.10-0.20	–	–
EN355	0.20 max	0.40-0.70	0.35 max	0.03	0.03	1.40-1.70	1.8-2.2	0.15-0.25	–	–
EN14A	0.15 – 0.25	1.3 – 1.7	0.10 – 0.35	0.03	0.03	0.25max	0.4max	–	–	–
EN36C	0.12 – 0.18	0.30 – 0.60	0.10 – 0.35	0.03	0.03	0.60 – 1.1	3.0 – 3.75	0.10 – 0.25	–	–
EN41B	0.35-0.45	0.6S max	0.10 – 0.45	0.03	0.03	1.5-1.8	0.40 max	0.10-0.25	–	Al 0.9 – 1.30
C22E	0.17-0.24	0.40-0.70	0.40 max	0.03	0.03	0.40 max	0.40 max	0.10 max	–	–
C25E	0.22-0.29	0.40-0.70	0.40 max	0.03	0.03	0.40 max	0.40max	0.10max	–	–
C30	0.27-0.34	0.50-0.80	0.4	0.03	0.03	–	–	–	–	–
C35E	0.32-0.39	0.50-0.80	0.50-0.80	0.03	0.03	0.20-0.40	–	–	–	–
C45	0.5	44721	0.04	0.03	0.03	0.4	0.4	–	–	–
CK45	0.42-0.50	0.50-0.80	0.15-0.35	0.03	0.03	–	–	–	–	–
C50	0.47-0.55	0.4	0.60-0.90	0.03	0.03	0.4	0.4	0.1	–	–
C55	0.50 – 60	0.60 – 0.90	0.4	0.03	0.03	0.4	0.4	0.1	–	–
C60	0.57 -0.65	0.60 – 0.90	0.4	0.03	0.03	0.4	0.4	0.1	–	–
S45C	0.40-0.50	0.60-0.90	0.10-0.35	0.03	0.03	–	–	–	–	–
S235J2	0.17	1.4	–	0.03	0.03	0.55	–	–	–	–
S275J2	0.18	1.5	–	0.03	0.03	0.55	–	–	–	–
S355J2	0.20-0.22	1.6	0.55	0.03	0.03	0.55	–	–	–	–
ST52.3	0.24max	–	–	0.03	0.03	–	0.01
C35E	0.32 -0.39	0.50 -0.80	0.4	0.03	0.03	0.4	0.4	0.1	–	–
C45R	0.42-0.50	0.50-0.80	0.4	0.03	0.03	0.4	0.4	0.1	–	–
35B2	0.32 -0.39	0.50 -0.80	0.4	0.03	0.03	–	–	–	–	–
28Mn6	0.25-0.32	1.30-1.65	0.4	0.03	0.03	0.4	0.4	0.1	–	–
46Cr2	0.42-0.50	0.50-0.80	0.4	0.025	0.035	0.40-0.60	–	–	–	–
34Cr4	0.30-0.37	0.60-0.90	0.4	0.025	0.035	0.90-1.20	–	–	–	–
34CrS4	0.30-0.37	0.60-0.90	0.4	0.025	0.020-0.040	0.90-1.20	–	–	–	–
41Cr4	0.38-0.45	0.60-0.90	0.4	0.025	0.020-0.040	0.90-1.20	–	–	–	–
20Mn5	0.17-0.23	1.00-1.60	0.60max	0.03	0.03	0.30max	0.40max	0.12max	–	–
42CrMo4	0.38-0.45	0.60-0.90	0.4	0.025	0.035	0.90-1.20	–	0.15-0.30	–	–
42CrMoS4	0.38-0.45	0.60-0.90	0.4	0.025	0.020-0.040	0.90-1.20	–	0.15-0.30	–	–
50CrMo4	0.46-0.54	0.60-0.90	0.4	0.025	0.035	0.90-1.20	–	0.15-0.30	–	–
30CrNiMo8	0.26-0.34	0.50-0.80	0.4	0.025	0.035	1.80-2.20	1.80-2.20	0.30-0.50	–	–
34CrNiMo6	0.34-0.38	0.50-0.80	0.4	0.025	0.035	1.30-1.70	1.30-1.70	0.15-0.30	–	–
36CrNiMo4	0.32-0.40	0.50-0.80	0.4	0.03	0.03	0.90-1.20	0.90-1.20	0.15-0.30	–	–
36NiCrMo16	0.32-0.39	0.50-0.80	0.4	0.025	0.025	1.60-2.00	3.6-4.1	0.25-0.45	–	–
51CrV4	0.47-0.55	0.70-1.10	0.4	0.025	0.025	1.90-1.20	–	–	0.10-0.25	–
27MnCrB5	0.24-0.30	1.10-1.40	0.4	0.03	0.03	0.30-0.60	–	–	–	B .0008-0.005
32CrB4	0.30-0.34	0.60-0.90	0.4	0.03	0.03	0.90-1.20	–	–	–	Cu-0.25, B-.0008-.005
25CrMo4	0.22 -0.29	0.4	0.60 -0.90	0.025	0.035	0.90 -1.20	–	0.15 -0.30	–	–
25CrMoS4	0.22 -0.29	0.4	0.60 -0.90	0.025	0.020-0.040	0.90 -1.20	–	0.15 -0.30	–	–
20MnCr5	0.17-0.22	1.1-1.4	0.10-0.35	0.03	0.03	1.0-1.3	–	–	–	–
16MnCr5	0.14-0.19	1.0-1.3	0.15-0.40	0.03	0.03	0.80-1.1	–	–	–	–
16MnCrS5	0.14-0.19	1.0-1.3	0.4	0.03	0.03	0.80-1.10	–	–	–	–
17CrNiMO6	0.14-0.20	0.60-0.90	0.4	0.03	0.03	0.80-1.10	1.20-1.50	0.15-0.25	–	–
18CrNiMo7	0.15-0.21	0.50-0.90	0.4	0.03	0.03	1.50-1.80	1.40-1.70	0.25-0.35	–	–
20MnB4	0.18-0.23	0.90-1.20	0.3	0.03	0.03	0.90-1.20	0.3	–	–	Cu-0.25, B-.0008-.005
23MnB4	0.20-0.25	0.90-1.20	0.3	0.03	0.03	0.90-1.20	0.3	–	–	Cu-0.25, B-.0008-.005
23MnB3	0.21-0.25	0.80-1.00	0.15	0.015	0.015	0.25-0.35	–	–	–	Cu-0.25, B-.0008-.005
34CrMo4	0.30-0.37	0.60-0.90	0.4	0.025	0.035	0.90-1.20	–	0.15-0.30	–	–
34CrMoS4	0.30-0.37	0.60-0.90	0.4	0.025	0.020-0.040	0.90-1.20	–	0.15-0.30	–	–
SS410	0.15	1	1	0.03	0.03	11.50-13.50	0.75	–	–	–
SS416	0.15	1.25	1	0.03	0.15min	12.00-14.00	–	–	–	–
SS420	0.15Min	1	1	0.03	0.03	12.00-14.00	–	–	–	–
SS431	0.2	1	1	0.03	0.03	15.00-17.00	1.25-2.50	–	–	—
SCM420	0.17-0.23	0.55-0.95	0.15-0.35	0.03	0.03	0.85-1.25	0.25	0.15-0.30	–	–
SCM440	0.37-0.44	0.55-0.95	0.15-0.35	0.03	0.03	0.85-1.25	0.25	0.15-0.30	–	–
13Ni13Cr3	0.10-0.15	0.40-0.70	0.15-0.35	0.03	0.03	0.60-1.00	3.00-3.50	–	–	–
15Ni16Cr5	0.12-0.18	0.40-0.70	0.10-0.35	0.03	0.03	1.00-1.40	3.80-4.30	–	–	–
36Si7	0.33-0.40	0.80-1.00	1.50-2.00	0.03	0.03	–	—	–	–	–
40Cr4	0.35-0.45	0.60-0.90	0.10-0.35	0.03	0.03	0.90-1.20	–	–	–	–
15Ni5Cr4Mo1	0.12-0.18	0.60-1.00	0.15-0.35	0.03	0.03	0.75-1.25	1.00-1.50	0.10-0.20	–	–
15Ni7Cr4Mo2	0.12-0.18	0.60-1.00	0.15-0.35	0.03	0.03	0.75-1.25	1.50-2.00	0.10-0.20	–	–
16Ni8Cr6Mo2	0.12-0.18	0.40-0.70	0.10-0.35	0.03	0.03	1.00-1.40	3.80-4.30	–	–	–
36Si7	0.33-0.40	0.80-1.00	1.50-2.00	0.03	0.03	–	–	–	–	–
37C15	0.32-0.42	1.30-1.70	0.10-0.35	0.03	0.03	–	–	–	–	–
35Mn6Mo3	0.30-0.40	1.30-1.80	0.10-0.35	0.03	0.03	–	–	0.25-0.35	–	–
40Ni6Cr4Mo3	0.35-0.45	0.40-0.70	0.10-0.35	0.03	0.03	0.90-1.30	1.20-1.60	0.10-0.20	–	–
40Ni10Cr3Mo6	0.36-0.44	0.40-0.70	0.10-0.35	0.03	0.03	0.50-0.80	2.25-2.75	0.40-0.70	–	–
55Si7	0.50-0.60	0.80-1.00	1.50-2.00	0.03	0.03	–	–	–	–	–
50Cr4V2	0.45-0.55	0.70-1.10	0.15-0.40	0.03	0.03	0.90-1.20	–	0.10-0.20	–	–
25Cr13Mo6	0.20-0.30	0.40-0.70	0.10-0.35	0.03	0.03	2.90-3.40	0.30Max	0.45-0.65	–	–
10C8S10	0.15 Max	0.60-0.90	0.05-0.30	0.06	0.08-0.13	–	–	–	–	–
14Cr14S14	0.10-0.18	1.20-1.50	0.05-0.30	0.06	0.10-0.18	–	–	–	–	–
25C12S14	0.20-0.30	1.00-1.25	0.25 Max	0.06	0.10-0.18	–	–	–	–	–
40C10S18	0.35-0.45	0.80-1.20	0.25 Max	0.06	0.14-0.22	–	–	–	–	–
11C10S25	0.08-0.15	0.80-1.20	0.10 Max	0.06	0.20-0.30	–	–	–	–	–
40C15C12	0.35-0.45	1.30-1.70	0.25 Max	0.06	0.08-0.15	–	–	–	–	–
SAE 1010	0.08-0.13	0.30-0.60	0.15-0.30	0.03	0.03	–	–	–	–	–
SAE 1025	0.22-0.28	0.30-0.60	0.15-0.30	0.03	0.03	–	–	–	–	–
SAE 1030	0.28-0.34	0.60-0.90	0.15-0.30	0.03	0.03	–	–	–	–	–
SAE 1035	0.32-0.38	0.60-0.90	0.15-0.30	0.03	0.03	–	–	–	–	–
SAE 1040	0.37-0.44	0.60-0.90	0.15-0.30	0.03	0.03	–	–	–	–	–
SAE 1117	0.14-0.20	1.00-1.30	0.15-0.30	0.03	0.03	–	–	–	–	–
SAE1541H	0.35-0.45	1.25-1.75	0.15-0.30	0.03	0.03	–	–	–	–	–
SAE4130	0.28-0.33	0.40-0.60	0.15-0.30	0.03	0.03	0.80-1.1	–	0.15-0.25	–	–
SAE4135	0.33-0.38	0.60-1.0	0.15-0.30	0.03	0.03	0.75-1.2	–	0.15-0.25	–	–
SAE4140	0.38-0.43	0.75-1.0	0.20-0.35	0.03	0.03	0.80-1.1	–	0.15-0.25	–	–
SAE4145	0.43-0.48	0.75-1.0	0.15-0.30	0.03	0.03	0.80-1.1	–	0.15-0.25	–	–
SAE 4145H	0.42-0.49	0.65-1.2	0.15-0.30	0.03	0.03	0.75-1.2	–	0.15-0.25	–	–
SAE 4330	0.28-0.33	0.85-1.15	0.10-0.35	0.03	0.03	0.80-1.10	1.10-1.40	0.35-0.55	–	–
SAE 4340	0.38–0.43	0.60–0.80	0.15 -0.35	0.03	0.03	0.70–0.90	1.65–2.00	0.20–0.30	–	–
SAE 4820	0.18–0.23	0.50–0.70	0.15 -0.35	0.03	0.03	–	3.25–3.75	0.20–0.30	–	–
SAE 5160	0.56–0.61	0.75–1.00	0.15 -0.35	0.03	0.03	0.70–0.90	–	–	–	–
SAE 8620	0.18-0.23	0.70-0.90	0.20-0.35	0.03	0.03	0.40-0.60	0.40-0.70	0.15-0.25	–	–
SAE 8630	0.28–0.33	0.70–0.90	0.15 to 0.3	0.03	0.03	0.40–0.60	0.40–0.70	0.15–0.25	–	–
SAE 8640	0.37-0.44	0.70-1.05	0.15-0.30	0.03	0.03	0.35-0.65	0.35-0.75	0.15-0.25	–	–
SAE 52100	0.95-1.1	0.25-0.40	0.20-0.35	0.025	0.025	1.3-1.6	–	–	–	–
SAE 9310	0.07–0.13	0.40–0.70	0.15-0.35	0.03	0.03	1.00-1.45	2.95-3.55	0.08-0.15	–	–
AISI 1010	0.08–0.13	0.30–0.60	–	0.03	0.03	–	–	–	–	–
AISI 1025	0.22–0.28	0.30–0.60	–	0.03	0.03	–	–	–	–	–
AISI 1030	0.28–0.34	0.60–0.90	–	0.03	0.03	–	–	–	–	–
AISI 1035	0.32–0.38	0.60–0.90	–	0.03	0.03	–	–	–	–	–
AISI 1040	0.37–0.44	0.60–0.90	–	0.03	0.03	–	–	–	–	–
AISI 1117	0.14–0.20	1.00–1.30	–	0.03	0.08–0.13	–	–	–	–	–
AISI 1541H	0.35–0.45	1.25–1.75	0.15-0.30	0.03	0.03	–	–	–	–	–
AISI 4130	0.28-0.33	0.40–0.60	0.15 -0.35	0.03	0.03	0.80–1.10	–	0.15–0.25	–	–
AISI 4135	0.33–0.38	0.70–0.90	0.15 -0.35	0.03	0.03	0.80–1.10	–	0.15–0.25	–	–
AISI 4140	0.38–0.43	0.75–1.0	0.15 -0.35	0.03	0.03	0.80-1.10	–	0.15-0.25	–	–
AISI 4145	0.43–0.48	0.75–1.0	0.15-0.35	0.03	0.03	0.80-1.10	–	0.15-0.25	–	–
AISI 4145H	0.35–0.45	1.25–1.75	0.15-0.30	0.03	0.03	–	–	–	–	–
AISI 4330	0.07–0.13	0.40–0.70	0.15-0.35	0.03	0.03	1.00-1.45	2.95-3.55	0.08-0.15	–	–
AISI 4340	0.38–0.43	0.75–1.00	0.15 -0.35	0.03	0.03	0.80–1.10	–	0.15–0.25	–	–
AISI 4820	0.18–0.23	0.50–0.70	0.15 -0.35	0.03	0.03	–	3.25–3.75	0.20–0.30	–	–
AISI 5160	0.56–0.61	0.75–1.00	0.15-0.35	0.03	0.03	0.70–0.90	–	–	–	–
AISI 8620	0.18–0.23	0.70–0.90	0.15 -0.35	0.03	0.03	0.40–0.60	0.40–0.70	0.15–0.25	–	–
AISI 8630	0.28–0.33	0.70–0.90	0.15 -0.35	0.03	0.03	0.40–0.60	0.40–0.70	0.15–0.25	–	–
AISI 8640	0.38–0.43	0.75–1.00	0.15 -0.35	0.03	0.03	0.40–0.60	0.40–0.70	0.15–0.25	–	–
AISI 9310	0.07–0.13	0.40–0.70	0.15-0.35	0.03	0.03	1.00-1.45	2.95-3.55	0.08-0.15	–	–
080A15	0.13 -0.18	0.70 -0.90	0.10 -0.40	0.03	0.03	–	–	–	–	–
080M15	0.12 -0.18	0.60 -1.00	0.10 -0.40	0.03	0.03	–	–	–	–	–
070M20	0.16 -0.24	0.50 -0.90	0.10 -0.40	0.03	0.03	–	–	–	–	–
080A30	0.26 -0.34	0.70 -0.90	0.10 -0.40	0.03	0.03	–	–	–	–	–
080M30	0.26 -0.34	0.60 -1.00	0.10 -0.40	0.03	0.03	–	–	–	–	–
080M40	0.36 -0.44	0.60 -1.00	0.10 -0.40	0.03	0.03	–	–	–	–	–
080A42	0.40 -0.45	0.70 -0.90	0.10 -0.40	0.03	0.03	–	–	–	–	–
080A47	0.45 -0.50	0.70 -0.90	0.10 -0.40	0.03	0.03	–	–	–	–	–
080M50	0.45 -0.55	0.60 -1.00	0.10 -0.40	0.03	0.03	–	–	–	–	–
070M55	0.50 -0.60	0.50 -0.90	0.10 -0.40	0.03	0.03	–	–	–	–	–
150M19	0.15 -0.23	1.30 -1.70	0.10 -0.40	0.03	0.03	–	–	–	–	–
150M36	0.32 -0.40	1.30 -1.70	0.10 -0.40	0.03	0.03	–	–	–	–	–
045A10	0.08 -0.13	0.30 -0.60	0.10 -0.40	0.03	0.03	–	–	–	–	–
045M10	0.07 -0.13	0.30 -0.60	0.10 -0.40	0.03	0.03	–	–	–	–	–
080M15	0.12 -0.18	0.60 -1.00	0.10 -0.40	0.03	0.03	–	–	–	–	–
210M15	0.12 -0.18	0.90 -1.30	0.10 -0.40	0.03	0.10 -0.18	–	–	–	–	–
635M15	0.12 -0.18	0.60 -0.90	0.10 -0.40	–	–	0.4 -0.80	0.70 -1.10	–	–	–
637M17	0.14 -0.20	0.60 -0.90	0.10 -0.40	–	–	0.60 -1.00	0.85 -1.25	–	–	–
655M13	0.10 -0.16	0.35 -0.60	0.10 -0.40	–	—	0.70 -1.00	3.00 -3.75	–	–	–
665M17	0.14 -0.20	0.35 -0.75	0.10 -0.40	–	–	–	1.50 -2.00	0.20 -0.30	–	–
805M17	0.14 -0.20	0.60 -0.95	0.10 -0.40	–	–	0.35 -0.65	0.35 -0.75	0.15 -0.25	–	–
805M20	0.17 -0.23	0.60 -0.95	0.10 -0.40	–	–	0.35 -0.65	0.35 -0.75	0.15 -0.25	–	–
815M17	0.14 -0.20	0.60 -0.90	0.10 -0.40	–	–	0.80 -1.20	1.20 -1.70	0.10 -0.20	–	–
820M17	0.14 -0.20	0.60 -0.90	0.10 -0.40	–	–	0.80 -1.20	1.50 -2.00	0.10 -0.20	–	–
822M17	0.14 -0.20	0.40 -0.70	0.10 -0.40	–	–	1.30 -1.70	1.75 -2.25	0.15 -0.25	–	–
835M15	0.12 -0.18	0.25 -0.50	0.10 -0.40	–	–	1.30 -1.70	3.90 -4.30	0.15 -0.30	–	–
530M40	0.36 -0.44	0.60 -0.90	0.10 -0.40	0.03	0.03	0.90 -1.20	–	–	–	–
605M36	0.32 -0.40	1.30 -1.70	0.10 -0.40	0.03	0.03	–	–	0.22 -0.32	–	–
606M36	0.32 -0.40	1.30 -1.70	0.10 -0.40	0.035 max.	0.15 -0.25	–	–	0.22 -0.32	–	–
708M40	0.36 -0.44	0.70 -1.00	0.10 -0.40	0.03	0.03	0.90 -1.20	–	0.15 -0.25	–	–
709M40	0.36 – 0.44	0.70 -1.00	0.10 -0.40	0.03	0.03	0.90 -1.20	–	0.25 -0.35	–	–
722M24	0.20 -0.28	0.45 -0.70	0.10 -0.40	0.03	0.03	3.00 -3.50	–	0.45 -0.65	–	–
817M40	0.36 -0.44	0.45 -0.70	0.10 -0.40	0.03	0.03	1.00 -1.40	1.30 -1.70	0.20 -0.35	–	–
826M31	0.27 -0.35	0.45 -0.70	0.10 -0.40	0.03	0.03	0.50 -0.80	2.30 -2.80	0.45 -0.65	–	–
826M40	0.36 -0.44	0.45 -0.70	0.10 -0.40	0.03	0.03	0.50 -0.80	2.30 -2.80	0.45 -0.65	–	–
945M38	0.34 -0.42	1.20 -1.60	0.10 -0.40	0.03	0.03	0.40 -0.60	0.60 -0.90	0.15 -0.25	–	–
410S21	0.09 -0.15	1	1	0.03	0.03	11.5 -13.5	1	–	–	–
416S21	0.09 -0.15	1.5	1	0.03	0.15 -0.35	11.5 -13.5	1	0.6	–	–
416S29	0.14 -0.20	0.06	1	0.15 -0.35	11.5 -13.5	0.6	1	–	–	–
420S29	0.14 -0.20	0.04	1	0.03	0.03	11.5 -13.5	1	–	–	–
420S37	0.20 -0.28	0.04	1	0.03	0.03	12.0 -14.0	1	–	–	–
431S29	0.09 to 0.15	0.04	1	0.03	0.03	15.0 -18.0	2.0 -3.0	–	–	–
X12Cr13	0.80-0.15	1.5	1	0.04	0.03	11.50-13.50	–	0.75Min	–	–
X20Cr13	0.16-0.25	1.5	1	0.04	0.03	12.00-14.00	–	–	–	–
X30Cr13	0.26-035	1.5	1	0.04	0.03	12.00-14.00	–	–	–	–
X17CrNi16-2	0.12-0.22	1.5	1	0.04	0.03	15.00-17.00	1.50-2.70	–	–	–
ASTM A105	0.30 max	0.60–1.05	0.10–0.35	0.035	0.04	0.30 max	0.40 max	0.12 max	–	Copper-40 Max,Vanadium-0.08Max
ASTM A182 F5	0.15	0.30-0.60	0.5	0.3	0.3	0.4-0.6	0.5	0.44-0.65	–	–
ASTM A182 F9	0.15	0.30-0.60	0.50-0.10	0.03	0.03	8.0-10.0	–	0.90-1.10	–	–
ASTM A182 F11 Class 1	0.05-0.15	0.30-0.60	0.50–1.00	0.03	0.03	1.00-1.50	–	0.44-0.65	–	–
ASTM A182 F11 Class 2	0.10–0.20	0.30–0.80	0.50–1.00	0.04	0.04	1.00–1.50	–	0.44–0.65	–	–
ASTM A182 F11 Class 3	0.10–0.20	0.30–0.80	0.50–1.00	0.04	0.04	1.00–1.50	–	0.44–0.65	–	–
ASTM A182 F12 Class 1	0.05-0.15	0.30-0.60	0.050Max	0.045	0.045	0.80–1.25	–	0.44-0.65	–	–
ASTM A182 F12 Class 2	0.10–0.20	0.30–0.80	0.10–0.60	0.04	0.04	0.80–1.25	–	0.44–0.65	–	–
ASTMA182 F22	0.05-0.015	0.30-0.60	0.5	0.03	0.03	2.00–2.50	–	0.87-1.13	–	–
ASTM A182 F91	0.08-0.12	0.30–0.60	0.20–0.50	0.02	0.01	8.0–9.5	0.4	0.85–1.05	0.18–0.25	0.06–0.10(columbium),N 0.03–0.07
										Al 0.04
ASTM A182 F92	0.07–0.13	0.30–0.60	0.5	0.02	0.01	8.50–9.50	0.4	0.30–0.60	–	0.04–0.09(columbium),V 0.15–0.25,
										N 0.030–0.070,Al 0.04,W 1.50–2.00,B
										0.001–0.006
ASTM A350 LF2	0.3	0.60–1.35	0.15–0.30	0.03	0.03	0.30 max	0.40 max	0.12 max	–	–
ASTM A193 B7/B7M	0.37-0.49	0.65-1.10	0.15-0.35	0.035	0.04	0.75-1.20	–	0.15-0.25	–	–
ASTM A193 B16	0.36-0.47	0.45-0.70	0.15-0.35	0.035	0.04	0.80-1.15	–	0.50-0.65	0.25-0.35	0.015(Aluminum)
ASTM A266 Grade 1-2	0.3	0.40–1.05	0.15–0.35	0.03	0.03	–	–	–	–	–
ASTM A266 Grade-3	0.35	0.80–1.35	0.15–0.35	0.03	0.03	–	–	–	–	–
ASTM A266 Grade-4	0.3	0.80–1.35	0.15–0.35	0.03	0.03	–	–	–	–	–
ASTM A540 B21	0.36–0.44	0.45–0.70	0.15–0.35	0.025	0.025	0.80–1.15	–	0.50–0.65	–	–
ASTM A540 B22	0.39–0.46	0.65–1.10	0.15–0.35	0.025	0.025	0.75–1.20	–	0.15–0.25	–	–
ASTM A540 B23	0.37–0.44	0.60–0.95	0.15–0.35	0.025	0.025	0.65–0.95	1.55–2.00	0.20–0.30	–	–
ASTM A540 B24	0.37–0.44	0.70–0.90	0.15–0.35	0.025	0.025	0.70–0.95	1.65–2.00	0.30–0.40	–	–
ASTM A540 B24V	0.37–0.44	0.60–0.95	0.15–0.35	0.025	0.025	0.60–0.95	1.55–2.00	0.40–0.60	–	–
X22CrMoV121	0.18 -0.24	0.40 -0.90	0.5	0.025	0.015	11.0 -12.5	0.30 -0.80	0.80 -1.20	0.25 -0.35	–
21CrMov57	0.17 -0.25	0.40 -0.80	0.04	0.025	0.03	1.20 -1.50	0.6	0.55 -0.80	0.20 -0.35	–
40CrMoV4-6	0.36 -0.44	0.45 -0.85	0.4	0.025	0.03	0.90 -1.20	–	0.50 -0.65	0.25 -0.35	–
27NiCrMoV15-6	0.22 -0.32	0.15 -0.40	0.15	0.01	0.007	1.20 -1.80	0.25 -0.45	3.40 -4.00	0.05 -0.15	–
26 NiCrMo 14-6	0.25 -0.30	0.20 -0.50	0.15 -0.30	0.02	0.015	1.20 -1.70	0.35 -0.55	3.30 -3.80	0.12	–
20CrMoVTiB4-10	0.17 -0.23	0.4	0.35 -0.75	0.02	0.015	0.90 -1.20	0.2	0.90 -1.10	0.60 -0.80	–
X19CrMoNbVN11-1	0.17 -0.23	0.40 -0.90	0.5	0.03	0.03	10.0 -11.5	0.20 -0.60	0.50 -0.80	0.10 -0.30	–
X10CrMoVNb9-1	0.08-0.12	0.30-0.60	0.20-0.50	0.03	0.03	8.00-9.50	0.85-1.05	0.04	–	–
DIN 1.2714/DB6	0.50- 0.60 max	0.60-0.90 max	0.10-0.35 max	0.03	0.03	0.95-1.30 max	1.50- 1.90 max	0.45- 0.70 max	–	–
DIN1.2343/AISI H11	0.33-0.43	0.20-0.60	0.80-1.25	0.03	0.03	4.75-5.50	–	1.10-1.60	0.30-0.60	–
Din 1.2344/AISI H13	0.32-0.45	0.20-0.60	0.80-1.25	0.03	0.03	4.75-5.50	–	1.10-1.75	0.80-1.20	–
33XC	0.29-0.37	0.30-0.60	1.0-1.4	–	–	1.30-1.60	–	–	–	–
38XC	0.34-0.42	0.30-0.60	1.0-1.4	–	–	1.30-1.60	–	–	–	–
40XC	0.37-0.45	0.30-0.60	1.2-1.6	–	–	1.30-1.60	–	–	–	–
45XH	0.41-0.49	0.50-0.80	0.17-0.37	–	–	0.45-0.75	1.00-1.40	–	–	–
30XH3A	0.27-0.33	0.30-0.60	0.17-0.37	–	–	0.60-0.90	2.75- 3.15	–	–	–
12X2H4A	0.09-0.15	0.30-0.60	0.17-0.37	–	–	1.25-1.65	3.25- 3.65	–	–	–
20X2H4A	0.16-0.22	0.30-0.60	0.17-0.37	–	–	1.25-1.65	3.25- 3.65	–	–	–
18X2H4MA	0.10-0.20	0.25-0.55	0.17-0.37	–	–	1.35-1.65	4.0-4.4	0.30-0.40	–	–
30XGCA	0.28-0.34	0.80-1.10	0.9-1.2	–	–	0.80-1.10	–	–	–	–
40ХН2МА	0.37- 0.44	0.50-0.80	0.17- 0.37	–	–	0.60-0.90	1.25-1.65	0.15-0.25	–	–
40Х2Н2MA	0.35- 0.42	0.30-0.60	0.17- 0.37	–	–	1.25-1.65	1.35- 1.75	0.20-0.30	–	–
30ХН2МА	0.27-0.34	0.30-0.60	0.17- 0.37	–	–	0.60-0.90	1.25- 1.65	0.20-0.30	–	–
14C6	0.10-0.18	0.40-0.70	0.15-0.35	0.04	0.04	–	–	–	–	–
15C8	0.10-0.20	0.60-0.90	0.15-0.35	0.04	0.04	–	–	–	–
20C8	0.15-0.25	0.60-0.90	0.15-0.35	0.04	0.04	–	–	–	–	–
25C8	0.20-0.30	0.60-0.90	0.15-0.35	0.04	0.04	–	–	–	–	–
30C8	0.25-0.35	0.60-0.90	0.15-0.35	0.04	0.04	–	–	–	–	–
35C8	0.30-0.40	0.60-0.90	0.15-0.35	0.04	0.04	–	–	–	–	–
45C8	0.40-0.50	0.60-0.90	0.15-0.35	0.04	0.04	–	–	–	–	–
55C8	0.50-0.60	0.60-0.90	0.15-0.35	0.04	0.04	–	–	–	–	–
65C6	0.60-0.70	0.50-0.80	0.15-0.35	0.04	0.04	–	–	–	–	–
15X	0.12-0.18	0.40-0.70	0.17-0.37	–	–	0.70-1.00	–	–	–	–
15XA	0.12-0.17	0.40-0.70	0.17-0.37	–	–	0.70-1.00	–	–	–	–
20X	0.17-0.23	0.50-0.80	0.17-0.37	–	–	0.70-1.00	–	–	–	–
30X	0.24-0.32	0.50-0.80	0.17-0.37	–	–	0.80-1.10	–	–	–	–
30XPA	0.27-0.33	0.50-0.80	0.17-0.37	–	–	1.00-1.30	–	–	–	–
35X	0.31-0.39	0.50-0.80	0.17-0.37	–	–	0.80-1.10	–	–	–	–
38XA	0.35-0.42	0.50-0.80	0.17-0.37	–	–	0.80-1.10	–	–	–	–
40X	0.36-0.44	0.50-0.80	0.17-0.37	–	–	0.80-1.10	–	–	–	–
45X	0.41-0.49	0.50-0.80	0.17-0.37	–	–	0.80-1.10	–	–	–	–
50X	0.46-0.54	0.50-0.80	0.17-0.37	–	–	0.80-1.10	–	–	–	–
15T	0.12-0.19	0.70-1.00	0.17-0.37	–	–	–	–	–	–	–
20T	0.17-0.24	0.70-1.00	0.17-0.37	–	–	–	–	–	–	–
25T	0.22-0.30	0.70-1.00	0.17-0.37	–	–	–	–	–	–	–
30T	0.27-0.35	0.70-1.00	0.17-0.37	–	–	–	–	–	–	–
35T	0.32-0.40	0.70-1.00	0.17-0.37	–	–	–	–	–	–	–
40T,40TP	0.37-0.45	0.70-1.00	0.17-0.37	–	–	–	–	–	–	–
45T	0.42-0.50	0.70-1.00	0.17-0.37	–	–	–	–	–	–	–
50T	0.48-0.56	0.70-1.00	0.17-0.37	–	–	–	–	–	–	–
10T2	0.07-0.15	1.20-1.60	0.17-0.37	–	–	–	–	–	–	–
30T2	0.26-0.35	1.40-1.80	0.17-0.37	–	–	–	–	–	–	–
35T2	0.31-0.39	1.40-1.80	0.17-0.37	–	–	–	–	–	–	–
40T2	0.36-0.44	1.40-1.80	0.17-0.37	–	–	–	–	–	–	–
45T2	0.41-0.49	1.40-1.80	0.17-0.37	–	–	–	–	–	–	–
50T2	0.46-0.55	1.40-1.80	0.17-0.37	–	–	–	–	–	–	–
47TT	0.44-0.52	0.10-0.22	0.10-0.22	–	–	–	–	–	–	0.06-0.12(Titanium)
18XT	0.15-0.21	0.90-1.20	0.17-0.37	–	–	0.90-1.20	–	–	–	–
18XTT	0.17-0.23	1.00-1.30	0.17-0.37	–	–	1.00-1.30	–	–	–	0.03-0.09(Titanium)
20XTP	0.18-0.24	0.75-1.05	0.17-0.37	–	–	0.75-1.05	–	–	–	–
27XTP	0.25-0.31	0.70-1.00	0.17-0.37	–	–	0.70-1.00	–	–	–	–
25XTP	0.22-0.29	0.80-1.10	0.17-0.37	–	–	1.00-1.30	–	–	–	0.03-0.09(Titanium)
30XTP	0.24-0.32	0.80-1.10	0.17-0.37	–	–	1.00-1.30	–	–	–	0.03-0.09(Titanium)
40XTTP	0.38-0.45	0.80-1.00	0.17-0.37	–	–	0.80-1.10	–	–	–	0.03-0.09(Titanium)
25XTM	0.23-0.29	0.90-1.20	0.17-0.37	–	–	0.90-1.20	–	0.20-0.30	–	–
38XTM	0.34-0.40	0.60-0.90	0.17-0.37	–	–	0.80-1.10	–	0.15-0.25	–	–
15XM	0.11-0.18	0.40-0.70	0.17-0.37	–	–	0.80-1.10	–	0.40-0.55	–	–
20XM	0.15-0.25	0.40-0.70	0.17-0.37	–	–	0.80-1.10	–	0.15-0.25	–	–
30XM	0.26-0.34	0.40-0.70	0.17-0.37	–	–	0.80-1.10	–	0.15-0.25	–	–
30XMA	0.26-0.33	0.40-0.70	0.17-0.37	–	–	0.80-1.10	–	0.15-0.25	–	–
35XM	0.32-0.40	0.40-0.70	0.17-0.37	–	–	0.80-1.10	–	0.15-0.25	–	–
38XM	0.35-0.42	0.35-0.65	0.17-0.37	–	–	0.90-1.30	–	0.20-0.30	–	–
30Х3MФ	0.27-0.34	0.30-0.60	0.17-0.37	–	–	2.30-2.70	–	0.20-0.30	–	0.6-0.12(Titanium)
40ХMФA	0.37-0.44	0.40-0.70	0.17-0.37	–	–	0.80-1.10	–	0.20-0.30	–	0.10-0.18(Titanium)
15ХФ	0.12-0.18	0.40-0.70	0.17-0.37	–	–	0.80-1.10	–	–	–	0.6-0.12(Titanium)
40ХФA	0.37-0.44	0.50-0.80	0.17-0.37	–	–	0.80-1.10	–	–	–	0.6-0.12(Titanium)
15Н2M(15НM)	0.10-0.18	0.40-0.70	0.17-0.37	–	–	–	1.50-1.90	0.20-0.30	–	–
20Н2M(20НM)	0.17-0.25	0.40-0.70	0.17-0.37	–	–	–	1.50-1.90	0.20-0.30	–	–
12XH	0.09-0.15	0.30-0.60	0.17-0.37	–	–	0.40-0.70	0.50-0.80	–	–	–
20XH	0.17-0.23	0.40-0.70	0.17-0.37	–	–	0.45-0.75	1.00-1.40	–	–	–
40XH	0.36-0.44	0.50-0.80	0.17-0.37	–	–	0.45-0.75	1.00-1.40	–	–	–
50XH	0.46-0.54	0.50-0.80	0.17-0.37	–	–	0.45-0.75	1.00-1.40	–	–	–
20XP	0.16-0.23	0.60-0.90	0.17-0.37	–	–	0.70-1.10	0.80-1.10	–	–	–
12XH2	0.09-0.16	0.30-0.60	0.17-0.37	–	–	0.60-0.90	1.50-1.90	–	–	–
12XH3A	0.09-0.16	0.30-0.60	0.17-0.37	–	–	0.60-0.90	2.75-3.15	–	–	–
20XH3A	0.17-0.24	0.30-0.60	0.17-0.37	–	–	0.60-0.90	2.75-3.15	–	–	–
20XTCA	0.17-0.23	0.80-1.10	0.9-1.2	–	–	0.80-1.10	–	–	–	–
25XTCA	0.22-0.28	0.80-1.10	0.9-1.2	–	–	0.80-1.10	–	–	–	–
30XTC	0.28-0.35	0.80-1.10	0.9-1.2	–	–	0.80-1.10	–	–	–	–
30XTCA	0.28-0.34	0.80-1.10	0.9-1.2	–	–	0.80-1.10	–	–	–	–
35XTCA	0.32-0.39	0.80-1.10	1.1-1.4	–	–	1.10-1.40	–	–	–	–
30XTCH2A(30XTCHA)	0.27-0.34	1.00-1.30	0.9-1.2	–	–	0.90-1.20	1.4-1.8	–	–	–
15XTH2TA(15XTHTA)	0.13-0.18	0.70-1.00	0.17-0.37	–	–	0.70-1.00	1.4-1.8	–	–	0.03-0.09(Titanium)
20XTHP	0.16-0.23	0.70-1.00	0.17-0.37	–	–	0.70-1.10	0.80-1.10	–	–	–
20XTHTP	0.18-0.24	0.80-1.10	0.17-0.37	–	–	0.40-0.70	0.40-0.70	–	–	0.03-0.09(Titanium)
38XTH	0.35-0.43	0.80-1.10	0.17-0.37	–	–	0.50-0.80	0.70-1.00	–	–	–
14XTH	0.13-0.18	0.70-1.00	0.17-0.37	–	–	0.80-1.10	0.80-1.10	–	–	–
19XTH	0.16-0.21	0.70-1.10	0.17-0.37	–	–	0.80-1.10	0.80-1.10	–	–	–
40ХН2МА(40ХНMA)	0.37-0.44	0.50-0.80	0.17-0.37	–	–	0.60-0.90	1.25-1.65	0.15-0.25	–	–
40Х2Н2MA(40Х1НВA)	0.35-0.42	0.30-0.60	0.17-0.37	–	–	1.25-1.65	1.35-1.75	0.20-0.30	–	–
38ХН3MA	0.33-0.40	0.25-0.50	0.17-0.37	–	–	0.80-1.20	2.75-3.25	0.20-0.30	–	–
18Х2Н4МА(18Х2Н4ВA)	0.14-0.20	0.25-0.55	0.17-0.37	–	–	1.35-1.65	4.0-4.4	0.30-0.40	–	–
25Х2Н4МА(25Х2Н4ВA)	0.21-0.28	0.25-0.55	0.17-0.37	–	–	1.35-1.65	4.0-4.4	0.30-0.40	–	–
30ХН2MФA(30ХН2ВФА)	0.27-0.34	0.30-0.60	0.17-0.37	–	–	0.60-0.90	2.0-2.4	0.20-0.30	0.10-0.18	–
36Х2Н2MФA(36ХН1MФA)	0.33-0.40	0.25-0.50	0.17-0.37	–	–	1.30-1.70	1.30-1.70	0.30-0.40	0.10-0.18	–
38ХН3МФA	0.33-0.40	0.25-0.50	0.17-0.37	–	–	1.20-1.50	3.0-3.5	0.35-0.45	0.10-0.18	–
45ХН2MФA(45ХMФA)	0.42-0.50	0.50-0.80	0.17-0.37	–	–	0.80-1.10	1.3-1.8	0.20-0.30	0.10-0.18	–
20ХН4ФA	0.17-0.24	0.25-0.55	0.17-0.37	–	–	0.70-1.10	3.75-4.15	–	0.10-0.18	–
38Х2МЮА(38ХМЮА)	0.35-0.42	0.30-0.60	0.20-0.45	–	–	1.35-1.65	–	0.15-0.25	–	0.7-1.1(Aluminium)
20XTHM	0.18-0.23	0.70-1.10	0.17-0.37	–	–	0.40-0.70	0.40-0.70	0.15-0.25	–	–
40XTHM	0.37-0.43	0.50-0.80	0.17-0.37	–	–	0.60-0.90	0.70-1.10	0.15-0.25	–	–
25XHTMT	0.23-0.29	0.50-0.80	0.17-0.37	–	–	0.40-0.60	0.80-1.10	0.40-0.50	–	0.04-0.09(Titanium)
X2CrNI12	0.03	1.5	1	0.04	0.15	10.50-12.50	0.30-1.00	–	–	–
X6Cr13	0.08	1	1	0.04	0.03	12.00-14.00	–	–	–	–
X6Cr17	0.08	1	1	0.04	0.03	16.00-18.00	–	–	–	–
X6CrMoS17	0.08	1.5	1.5	0.04	0.15-0.35	16.00-18.00	–	0.20-0.60	–	–
X6CrMoS17-1	0.08	1	1	0.04	0.03	16.00-18.00	–	0.90-1.40	–	–
X2CrMoTIS-2*	0.03	0.5	1	0.04	0.15-0.35	17.50-18.00	–	2.00-2.50	–	0.30-0.80(Titanium)
X12CrS13	0.08-0.15	1.5	1	0.04	0.15-0.35	12.00-14.00	–	0.60min	–	–
X39Cr13	0.36-0.42	1	1	0.04	0.03	12.50-14.50	–	–	–	–
X46Cr13	0.43-0.50	1	1	0.04	0.03	12.50-14.50	–	–	–	–
X50CrMoV15	0.45-0.55	1	1	0.04	0.03	14.00-15.00	–	0.50-0.80	0.10-0.20	–
X14CrMoS14	0.10-0.17	1.5	1	0.04	0.03	15.50-17.50	–	0.20-0.60	–	–
X39CrMo17-1	0.33-0.45	1.5	1	0.04	0.03	15.50-17.50	1.00min	0.80-1.30	–	–
X3CrNiMo13-4	0.05Min	1.5	0.7	0.04	0.015	12.00-14.00	3.50-4.50	0.30-0.70	–	–
X4CrNiMo16-5-1	0.06Min	1.5	0.7	0.04	0.03	15.00-17.00	4.00-6.00	0.80-1.50	–	–
X5CrNiCuNb16-4	0.07Min	1.5	0.7	0.04	0.03	15.00-17.00	3.00-5.00	0.60min	–	3.00-5.00(Cu),5xC to 0.45(nb)
X7CrNIAI17-7	0.09Min	1	0.7	0.04	0.15	16.00-18.00	6.50-7.80	–	–	–
X5CrNIMoCuNb14-5	0.07Min	1	0.7	0.04	0.15	13.00-15.00	5.00-6.00	1.20-2.00	–	1.20-2.00(Cu),0.15-0.60(nb)
X29CrS13	0.25-0.32	1.5	1	0.04	0.15-0.25	12.00-13.50	–	0.60Min	–	–
X70CrMo15	0.65-0.75	1	0.07	0.04	0.03	14.00-16.00	–	0.40-0.60	–	–
X105CrMo17	0.95-1.20	1	1	0.04	0.03	16.00-18.00	–	0.40-0.60	–	–
X90CrMoV18	0.85-0.95	1	1	0.04	0.03	17.00-18.00	–	0.90-1.20	0.07-0.12	–
X10CrNI18-8	0.05-0.15	2.00Min	2.00Min	0.045	0.015Min	16.00-19.00	6.00-9.50	0.80Min	–	–
X2CrNI18-9	0.030Min	2.00Min	1.00Min	0.045	0.030Min	17.50-19.50	8.00-10.00	–	–	–
X2CrNI19-11	0.030Min	2.00Min	1.00Min	0.045	0.030Min	18.00-20.00	10.00-12.00	–	–	–
X2CrNIN18-10	0.030Min	2.00Min	1.00Min	0.045	0.030Min	17.00-19.50	8.50-11.50	–	–	–
X5CrNI18-10	0.07Min	2.00Min	1.00Min	0.045	0.030Min	17.00-19.50	8.00-10.50	–	–	–
X8CrNIS18-9	0.10Min	2.00Min	1.00Min	0.045	0.15-0.35	17.00-19.00	8.00-10.00	–	–	1.00Min(Cu)
X6CrNiTi18-10	0.08Min	2.00Min	1.00Min	0.045	0.030Min	17.00-19.00	9.00-12.00	–	5 X C to 0.70	–
X4CrNI18-12	0.06Min	2.00Min	1.00Min	0.045	0.030Min	17.00-19.00	11.00-13.00	–	–	–
X2CrNiMo17-12-2	0.030Min	2.00Min	1.00Min	0.045	0.030Min	16.50-18.50	10.00-13.00	2.00-2.50	–	–
X2CrNiMoN17-11-2	0.030Min	2.00Min	1.00Min	0.045	0.030Min	16.50-18.50	10.00-12.00	2.00-2.50	–	–
X5CrNIMo17-12-2	0.07Min	2.00Min	1.00Min	0.045	0.030Min	16.50-18.50	10.00-13.00	2.00-2.50	–	–
X6CrNIMoTI17-11-2	0.08Min	2.00Min	1.00Min	0.045	0.030Min	16.50-18.50	10.50-13.50	2.00-2.50	5 X C to 0.70	–
X2CrNiMo17-12-3	0.030Min	2.00Min	1.00Min	0.045	0.030Min	16.50-18.50	10.50-13.00	2.50-3.00	–	–
X2CrNiMoN17-13-3	0.030Min	2.00Min	1.00Min	0.045	0.015Min	16.50-18.50	11.00-14.00	2.50-3.00	–	–
X3CrNiMo17-13-3	0.05Min	2.00Min	1.00Min	0.045	0.030Min	16.50-18.50	10.50-13.00	2.50-3.00	–	–
X2CrNiMo18-14-3	0.030Min	2.00Min	1.00Min	0.045	0.030Min	17.00-19.00	12.50-15.00	2.50-3.00	–	–
X2CrNiMoN17-13-5	0.030Min	2.00Min	1.00Min	0.045	0.015Min	16.50-18.50	12.50-14.50	4.00-5.00	–	–
X3CrNiCu18-19-4	0.04Min	2.00Min	1.00Min	0.045	0.030Min	17.00-19.00	8.50-10.50	–	–	3.00-4.00(Cu)
X1NICrMoCu25-20-5	0.020Min	2.00Min	0.70Min	0.03	0.010Min	19.00-21.00	24.00-26.00	4.00-5.00	–	1.20-2.00(Cu)
X6CrNiNb18-10	0.08Min	2.00Min	1.00Min	0.045	0.015Min	17.00-19.00	9.00-12.00	–	–	10xC to 1.00(NB)
X6CrNiMoNb17-12-2	0.08Min	2.00Min	1.00Min	0.045	0.015Min	16.50-18.50	10.50-13.50	2.00-2.50	–	10xC to 1.00(NB)
X2CrNiMo18-15-4	0.030Min	2.00Min	1.00Min	0.045	0.030Min	17.50-19.50	13.00-16.00	3.00-4.00	–	–
X1CrNiSi18-15-4	0.015Min	2.00Min	3.70-4.50	0.025	0.010Min	16.50-18.50	14.00-16.00	0.20Min	–	–
X3CrNICu19-9-2	0.035Min	1.50-2.00	1.00Min	0.045	0.015Min	18.00-19.00	8.00-9.00	–	–	1.50-2.00(Cu)
X6CrNICuS18-9-2	0.08Min	2.00Min	1.00Min	0.045	0.15-0.35	17.00-19.00	8.00-10.00	0.60Min	–	1.40-1.80(Cu)
X3CrNiCuMo17-11-3-2	0.04Min	2.00Min	1.00Min	0.045	0.015Min	16.50-17.50	10.00-11.00	2.00-2.50	–	3.00-3.50(Cu)
X1NICrMoCu31-27-4	0.020Min	2.00Min	0.70Min	0.03	0.010Min	26.00-28.00	30.00-32.00	3.00-4.00	–	0.70-1.50(Cu)
X1CrNIMoCuN25-25-5	0.020Min	2.00Min	0.70Min	0.03	0.010Min	24.00-26.00	24.00-27.00	4.70-5.70	–	1.00-2.00(Cu)
X1CrNIMoCuN20-18-7*	0.020Min	2.00Min	0.70Min	0.03	0.010Min	19.50-20.50	17.50-18.50	6.00-7.00	–	0.50-1.00(Cu)
X1NICrMoCuN25-20-7	0.020Min	2.00Min	0.50Min	0.03	0.010Min	19.00-21.00	24.00-26.00	6.00-7.00	–	0.50-1.50(Cu)
X3CrNIMoN27-5-2	0.05	2	1	0.035	0.03	25.00-28.00	4.50-6.50	1.30-2.00	–	–
X3CrNIMoN22-5-3	0.03	2	1	0.035	0.015	21.00-23.00	4.50-6.50	2.50-3.50	–	–
X2CrNIN23-4*	0.03	2	1	0.035	0.015	22.00-24.00	3.50-5.50	0.10-0.60	–	0.10-0.60(Cu)
X2CrNIMoCuN25-6-3	0.03	2	0.7	0.035	0.015	24.00-26.00	5.50-7.50	2.70-4.00	–	1.00-2.50(Cu)
X2CrNIMoN25-7-4*	0.03	2	1	0.035	0.015	24.00-26.00	6.00-8.00	3.00-4.50	–	–
X2CrNIMoCuWN25-7-4	0.03	1	1	0.035	0.015	24.00-26.00	6.00-8.00	3.00-4.00	–	0.50-1.00(Cu)
38Cr2	0.35-0.42	0.50-0.80	0.4	0.025	0.035	0.40-0.60	–	–	–	–
37Cr4	0.34-0.41	0.60-0.90	0.4	0.025	0.035	0.90-1.20	–	–	–	–
37CrS4	0.34-0.41	0.60-0.90	0.4	0.025	0.020-0.040	0.90-1.20	–	–	–	–
41Cr4	0.38-0.45	0.60-0.90	0.4	0.025	0.035	0.90-1.20	–	–	–	–
41CrS4	0.38-0.45	0.60-0.90	0.4	0.025	0.020-0.040	0.90-1.20	–	–	–	–
35NICr6	0.30-0.37	0.60-0.90	0.4	0.025	0.025	0.80-1.20	–	1.20-1.60	–	–
39NiCrMo3	0.35-0.43	0.50-0.80	0.4	0.025	0.035	0.60-1.00	0.70-1.00	0.15-0.25	–	–
30NiCrMo16-6	0.26-0.33	0.50-0.80	0.4	0.025	0.025	1.20-1.50	3.3-4.3	0.30-0.60	–	–
20MnB5	0.17-0.23	1.10-1.40	0.4	0.025	0.035	–	–	–	–	0.0008-0.0050(B)
30MnB5	0.27-0.33	1.15-1.45	0.4	0.025	0.035	–	–	–	–	0.0008-0.0050(B)
38MnB5	0.36-0.42	1.15-1.45	0.4	0.025	0.035	–	–	–	–	0.0008-0.0050(B)
33MnCrB5-2	0.30-0.36	1.20-1.50	0.4	0.025	0.035	0.30-0.60	–	–	–	0.0008-0.0050(B)
39MnCrB6-2	0.36-0.42	1.40-1.70	0.4	0.025	0.035	0.30-0.60	–	–	–	0.0008-0.0050(B)
230M07	0.15Max	0.90-1.30	0.05Max	0.090Max	0.25-0.35	–	–	–	–	–
216M36	0.32-0.40	1.30-1.70	0.25Max	0.06Max	0.12-0.20	–	–	–	–	–
212A42	0.40-0.45	1.00-1.30	0.25Max	0.06Max	0.12-0.20	–	–	–	–	–
226M44	0.40-0.48	1.30-1.70	0.25Max	0.06Max	0.22-0.30	–	–	–	–	–
080A15	0.13-0.18	0.70-0.90	0.10-0.40	0.05Max	0.05Max	–	–	–	–	–
080M15	0.12-0.18	0.60-1.00	0.10-0.40	0.05Max	0.05Max	–	–	–	–	–
070M20	0.16-0.24	0.50-0.90	0.10-0.40	0.05Max	0.05Max	–	–	–	–	–
080A30	0.26-0.34	0.70-0.90	0.10-0.40	0.05Max	0.05Max	–	–	–	–	–
080M30	0.26-0.34	0.60-1.00	0.10-0.40	0.05Max	0.05Max	–	–	–	–	–
080M40	0.36-0.44	0.60-1.00	0.10-0.40	0.05Max	0.05Max	–	–	–	–	–
080A42	0.40-0.45	0.70-0.90	0.10-0.40	0.05Max	0.05Max	–	–	–	–	–
080A47	0.45-0.50	0.70-0.90	0.10-0.40	0.05Max	0.05Max	–	–	–	–	–
080M50	0.45-0.55	0.60-1.00	0.10-0.40	0.05Max	0.05Max	–	–	–	–	–
070M55	0.50-0.60	0.50-0.90	0.10-0.40	0.05Max	0.05Max	–	–	–	–	–
150M19	0.15-0.23	1.30-1.70	0.10-0.40	0.05Max	0.05Max	–	–	–	–	–
150M36	0.32-0.40	1.30-1.70	0.10-0.40	0.05Max	0.05Max	–	–	–	–	–
045A10	0.08-0.13	0.30-0.60	0.10-0.40	0.05Max	0.05Max	–	–	–	–	–
045M10	0.07-0.13	0.30-0.60	0.10-0.40	0.05Max	0.05Max	–	–	–	–	–
080M15	0.12-0.18	0.60-1.00	0.10-0.40	0.05Max	0.05Max	–	–	–	–	–
210M15	0.12-0.18	0.90-1.30	0.10-0.40	0.05Max	0.10-0.18	–	–	–	–	–
635M15	0.12-0.18	0.60-0.90	0.10-0.40	–	–	0.4-0.80	0.70-1.00	–	–	–
637M17	0.14-0.20	0.60-0.90	0.10-0.40	–	–	0.60-1.00	0.85-1.25	–	–	–
655M13	0.10-0.16	0.35-0.60	0.10-0.40	–	–	0.70-1.00	3.00-3.75	–	–	–
665M17	0.14-0.20	0.35-0.75	0.10-0.40	–	–	–	1.50-2.00	0.20-0.30	–	–
805M17	0.14-0.20	0.60-0.95	0.10-0.40	–	–	0.35-0.65	0.35-0.75	0.15-0.25	–	–
805M20	0.17-0.23	0.60-0.95	0.10-0.40	–	–	0.35-0.65	0.35-0.75	0.15-0.25	–	–
815M17	0.14-0.20	0.60-0.90	0.10-0.40	–	–	0.80-1.20	1.20-1.70	0.10-0.20	–	–
820M17	0.14-0.20	0.60-0.90	0.10-0.40	–	–	0.80-1.20	1.50-2.00	0.10-0.20	–	–
822M17	0.14-0.20	0.40-0.70	0.10-0.40	–	–	1.30-1.70	1.75-2.25	0.15-0.25	–	–
835M15	0.12-0.18	0.25-0.50	0.10-0.40	–	–	1.00-1.40	3.90-4.30	0.15-0.30	–	–
530M40	0.36-0.44	0.60-0.90	0.10-0.40	0.035max	0.040Max	0.90-1.20	–	–	–	–
605M36	0.32-0.40	1.30-1.70	0.10-0.40	0.035max	0.040Max	–	–	0.22-0.32	–	–
606M36	0.32-0.40	1.30-1.70	0.10-0.40	0.035max	0.15-0.25	–	–	0.22-0.32	–	–
708M40	0.36-0.44	0.70-1.00	0.10-0.40	0.035max	0.040Max	0.90-1.20	–	0.15-0.25	–	–
709M40	0.36-0.44	0.70-1.00	0.10-0.40	0.035max	0.040Max	0.90-1.20	–	0.25-0.35	–	–
722M24	0.20-0.28	0.45-0.70	0.10-0.40	0.035max	0.040Max	3.00-3.50	–	0.45-0.65	–	–
817M40	0.36-0.44	0.45-0.70	0.10-0.40	0.035max	0.040Max	1.00-1.40	1.30-1.70	0.20-0.35	–	–
826M31	0.27-0.35	0.45-0.70	0.10-0.40	0.035max	0.040Max	0.50-0.80	2.30-2.80	0.45-0.65	–	–
826M40	0.36-0.44	0.45-0.70	0.10-0.40	0.035max	0.040Max	0.50-0.80	2.30-2.80	0.45-0.65	–	–
945M38	0.34-0.42	1.20-1.60	0.10-0.40	0.035max	0.040Max	0.40-0.60	0.60-0.90	0.15-0.25	–	–
403S17	0.08	1	1	0.04	0.03	12.0-14.0	0.5	–	–	–
430S17	0.08	1	1	0.04	0.03	16.0-18.0	0.5	–	–	–
410S21	0.09-0.15	1	1	0.04	0.03	11.5-13.5	1	–	–	–
416S21	0.09-0.15	1.5	1	0.06	0.15-0.35	11.5-13.5	1	0.6	–	–
416S29	0.14-0.20	1.5	1	0.06	0.15-0.35	11.5-13.5	1	0.6	–	–
416S37	0.20-0.28	1.5	1	0.06	0.15-0.35	12.0-14.0	1	0.6	–	–
416S41	0.09-0.15	1.5	1	0.06	0.06	11.5-13.5	1	0.6	–	0.15-0.35(Se)
420S29	0.14-0.20	1	1	0.04	0.03	11.5-13.5	1	–	–	–
420S37	0.20-0.28	1	1	0.04	0.03	12.0-14.0	1	–	–	–
431S29	0.12-0.20	1	1	0.04	0.03	15.0-18.0	2.0-3.0	–	–	–
302S31	0.12	2	1	0.045	0.03	17.0-19.0	8.00-10.00	–	–	–
304S11	0.03	2	1	0.045	0.03	17.0-19.0	9.00-12.00	–	–	–
304S15	0.06	2	1	0.045	0.03	17.5-19.0	8.00-11.00	–	–	–
304S31	0.07	2	1	0.045	0.03	17.0-19.0	8.00-11.00	–	–	–
321S31	0.08	2	1	0.045	0.03	17.0-19.0	9.00-12.00	–	–	Ti 5C max 0.80
347S31	0.08	2	1	0.045	0.03	17.0-19.0	9.00-12.00	–	–	Nb 10C max 1.00
316S11	0.03	2	1	0.045	0.03	16.5-18.5	11.00-14.00	2.00-2.50	–	–
316S13	0.03	2	1	0.045	0.03	16.5-18.5	11.5-14.50	2.50-3.00	–	–
316S31	0.07	2	1	0.045	0.03	16.5-18.5	10.5-13.5	2.00-2.50	–	–
316S33	0.07	2	1	0.045	0.03	16.5-18.5	11.00-14.00	2.50-3.00	–	–
320S31	0.08	2	1	0.045	0.03	16.5-18.5	11.00-14.00	2.00-2.50	–	Ti 5C max 0.80
310S31	0.15	2	1.5	0.045	0.03	24.00-16.00	19.00-22.00	–	–	–
303S31	0.12	2	1	0.06	0.15-0.35	17.0-19.0	8.00-10.00	1.00(9)	–	–
303S42	0.12	2	1	0.06	0.06	17.0-19.0	8.00-10.00	1.00(9)	–	Se 0.15-0.25
325S31	0.12	2	1	0.15-0.35	0.15-0.35	17.0-19.0	8.00-10.00	–	–	Ti 5C max 0.90
ASTM A193 B5	0.10Min	1	1Max	0.04	0.03	4.00-6.00	–	0.40-0.65	–	–
ASTM A193 B6/B6X	0.08-0.15	1	1Max	0.04	0.03	11.5-13.5	–	–	–	–
ASTM A193 B84/B8NA	0.08	2	1	0.045	0.03	18.00-20.00	8.00-11.00	–	–	0.10-0.16(Nitrogen)
ASTM A193 B8MN/B8MNA	0.08	2	1	0.045	0.03	16.00-18.00	10.00-13.00	2.00-3.00	–	0.10-0.16(Nitrogen)
ASTM A193 B8MLCuN/B8MLCuNA	0.02	1	0.8	0.03	0.01	19.5-20.5	17.5-18.5	6.00-6.50		0.18-0.22(Nitrogen),0.50-1.00(Copper)
ASTM A193 B8T/B8TA	0.08	2	1	0.045	0.03	17.00-19.00	9.00-12.00	–	–	5 x (C + N) min, 0.70 max(Titanium)
ASTM A193 B8R/B8RA	0.06	4.0-6.0	1Max	0.045	0.03	20.5–23.5	11.5–13.5	1.50–3.00	0.10–0.30	0.20–0.40(Nitrogen),0.10–0.30(Columbium + tantalum)
ASTM A193 B8S/B8SA	0.1	7.0–9.0	3.5–4.5	0.06	0.03	16.0–18.0	8.0–9.0	–	–	0.08–0.18(Nitrogen)
ASTM A193 B8LN/B8LNA	0.03	2	1	0.045	0.03	18.0–20.0	8.0–11.0	–	–	0.10–0.16(Nitrogen)
ASTM A193 B8MLN/B8MLNA	0.03	2	1	0.045	0.03	16.0–18.0	10.0–13.0	2.00–3.00	–	0.10–0.16(Nitrogen)
ASTM A182 F 1	0.28	0.60–0.90	0.15–0.35	0.045	0.045	–	–	0.44–0.65	–	–
ASTM A182 F 2B	0.05–0.21	0.30–0.80	0.10–0.60	0.04	0.04	0.50–0.81	–	0.44–0.65	–	–
ASTM A182 F 5aC	0.25	0.6	0.5	0.04	0.03	4.0–6.0	0.5	0.44–0.65	–	–
ASTM A182F 911	0.09–0.13	0.30–0.60	0.10–0.50	0.02	0.01	8.5–10.5	0.4	0.90–1.10	–	W 0.90–1.10,Al 0.04,N 0.04–0.09,V 0.18–0.25,B 0.0003–0.006
ASTM A182 F21	0.05–0.15	0.30–0.60	0.50 max	0.04	0.04	2.7–3.3	–	0.80–1.06	–	–
ASTM A182 F3V	0.05–0.18	0.30–0.60	0.1	0.02	0.02	2.8–3.2	–	0.90–1.10	0.20–0.30	0.015–0.035(Titanium),B 0.001–0.003
ASTM A182 F3VCb	0.10–0.15	0.30–0.60	0.1	0.02	0.01	2.7–3.3	0.25	0.90–1.10	0.20–0.30	0.015–0.070(columbium),0.015(Titanium),Cu 0.25,Ca 0.0005–0.0150
ASTM A182 F22 Class 1	0.05–0.15	0.30–0.60	0.5	0.04	0.04	2.00–2.50	–	0.87–1.13	–	–
ASTM A182 F22 Class 3	0.05–0.15	0.30–0.60	0.5	0.04	0.04	2.00–2.50	–	0.87–1.13	–	–
ASTM A182 F22V	0.11–0.15	0.30–0.60	0.1	0.015	0.01	2.00–2.50	0.25	0.90–1.10	–	0.07(columbium),0.030(Titanium)
ASTM A182 F23	0.04–0.10	0.10–0.60	0.5	0.03	0.01	1.90-2.60	–	0.05-0.30	0.20–0.30	0.02–0.08(columbium),B 0.0005–0.006,N 0.030,Al 0.030,
										W 1.45–1.75
ASTM A182 F24	0.05–0.10	0.30–0.70	0.15–0.45	0.02	0.01	2.20–2.60	–	0.90–1.10	–	0.015–0.035(Titanium),N 0.12,Al 0.020,
										B 0.0015–0.0070
ASTM A182 FR	0.2	0.40–1.06	–	0.045	0.05	–	1.60–2.24	–	–	Cu 0.75–1.25
ASTM A182 F122	0.07–0.14	0.7	0.5	0.02	0.01	10.00–12.50	0.5	0.25–0.60	0.15–0.30	0.04–0.10(columbium),B 0.005,N 0.040–0.100,Al 0.040,
										Cu 0.30–1.70,W 1.50–2.50
ASTM A182 F6a	0.15	1	1	0.04	0.03	11.5–13.5	0.5	–	–	–
ASTM A182 F6b	0.15	1	1	0.02	0.02	11.5–13.5	1.00–2.00	0.40–0.60	–	Cu 0.50
ASTM A182 F6NM	0.05	0.50–1.00	0.6	0.03	0.03	11.5–14.0	3.5–5.5	0.50–1.00	–	–
ASTM A182 FXM-27CbF	0.01	0.4	0.4	0.02	0.02	25.0–27.5	0.5	0.75–1.50	–	0.05–0.20(columbium),N 0.015, Cu 0.20
ASTM A182 F429	0.12	1	0.75	0.04	0.03	14.0–16.0	0.5	–	–	–
ASTM A182 F430	0.12	1	0.75	0.04	0.03	16.0–18.0	0.5	–	–	–
ASTM A182 F304G	0.08	2	1	0.045	0.03	18.0–20.0	8.0–11.0	–	–	–
ASTM A182 F304H	0.04–0.10	2	1	0.045	0.03	18.0–20.0	8.0–11.0	–	–	–
ASTM A182 F304LG	0.03	2	1	0.045	0.03	18.0–20.0	8.0–13.0	–	–	–
ASTM A182 F304NH	0.08	2	1	0.045	0.03	18.0–20.0	8.0–10.5	–	–	–
ASTM A182 F304LNH	0.03	2	1	0.045	0.03	18.0–20.0	8.0–10.5	–	–	–
ASTM A182 F309H	0.04–0.10	2	1	0.045	0.03	22.0–24.0	12.0–15.0	–	–	–
ASTM A182 F310	0.25	2	1	0.045	0.03	24.0–26.0	19.0–22.0	–	–	–
ASTM A182 F310H	0.04–0.10	2	1	0.045	0.03	24.0–26.0	19.0–22.0	–	–	–
ASTM A182 F310MoLN	0.03	2	0.04	0.03	0.015	24.0–26.0	21.0–23.0	2.00–3.00	–	N 0.10–0.16
ASTM A182 F316G	0.08	2	1	0.045	0.03	16.0–18.0	10.0–14.0	2.00–3.00	–	–
ASTM A182 F316H	0.04–0.10	2	1	0.045	0.03	16.0–18.0	10.0–14.0	2.00–3.00	–	–
ASTM A182 F316LG	0.03	2	1	0.045	0.03	16.0–18.0	10.0–15.0	2.00–3.00	–	–
ASTM A182 F316NH	0.08	2	1	0.045	0.03	16.0–18.0	11.0–14.0	2.00–3.00	–	–
ASTM A182 F316LNH	0.03	2	1	0.045	0.03	16.0–18.0	11.0–14.0	2.00–3.00	–	–
ASTM A182 F317	0.08	2	1	0.045	0.03	18.0–20.0	11.0–15.0	3.0–4.0	–	–
ASTM A182 F317L	0.03	2	1	0.045	0.03	18.0–20.0	11.0–15.0	3.0–4.0	–	–
ASTM A182 F321	0.08	2	1	0.045	0.03	17.0–19.0	9.0–12.0	–	–	–
ASTM A182 F321H	0.04–0.10	2	1	0.045	0.03	17.0–19.0	9.0–12.0	–	–	–
ASTM A182 F347	0.08	2	1	0.045	0.03	17.0–20.0	9.0–13.0	–	–	–
ASTM A182 F347H	0.04–0.10	2	1	0.045	0.03	17.0–20.0	9.0–13.0	–	–	–
ASTM A182 F348	0.08	2	1	0.045	0.03	17.0–20.0	9.0–13.0	–	–	Co 0.20, Ta 0.10
ASTM A182 F348H	0.04–0.10	2	1	0.045	0.03	17.0–20.0	9.0–13.0	–	–	Co 0.20, Ta 0.10
ASTM A182 FXM-11	0.04	8.0–10.0	1	0.06	0.03	19.0–21.5	5.5–7.5	–	–	N 0.15–0.40
ASTM A182 FXM-19	0.06	4.0–6.0	1	0.04	0.03	20.5–23.5	11.5–13.5	1.50–3.00	0.10–0.30	0.10–0.30(columbium),N 0.20–0.40
ASTM A182 F10	0.10–0.20	0.50–0.80	1.00–1.40	0.04	0.03	7.0–9.0	19.0–22.0	–	–	–
ASTM A182 F20	0.07	2	1	0.045	0.035	19.0–21.0	32.0–38.0	2.00–3.00	–	8xCmin –1.00(columbium),Cu 3.0–4.0
ASTM A182 F44	0.02	1	0.8	0.03	0.01	19.5–20.5	17.5–18.5	6.0–6.5	–	Cu 0.50–1.00, N 0.18–0.22
ASTM A182 F45	0.05–0.10	0.8	1.40–2.00	0.04	0.03	20.0–22.0	10.0–12.0	–	–	N 0.14–0.20, Ce 0.03–0.08
ASTM A182 F46	0.018	2	3.7–4.3	0.02	0.02	17.0–18.5	14.0–15.5	0.2	–	Cu 0.50
ASTM A182 F47	0.03	2	0.75	0.045	0.03	18.0–20.0	13.0–17.5	4.0–5.0	–	N 0.10
ASTM A182 F48	0.03	2	0.75	0.045	0.03	17.0–20.0	13.5–17.5	4.0–5.0	–	N 0.10–0.20
ASTM A182 F49	0.03	5.0–7.0	1	0.03	0.01	23.0–25.0	16.0–18.0	4.0–5.0	–	0.1(columbium),N 0.40–0.60
ASTM A182 F56	0.04–0.08	1	0.3	0.02	0.015	26.0–28.0	31.0–33.0	–	–	0.6–1.0(columbium),Ce 0.05–0.10,
										Al 0.025
ASTM A182 F58	0.03	2.0–4.0	1	0.035	0.02	23.0–25.0	21.0–24.0	5.2–6.2	–	N 0.35–0.60,Cu 1.00–2.50,W 1.50–2.50
ASTM A182 F62	0.03	2	1	0.04	0.03	20.00–22.00	23.50–25.50	6.00–7.00	–	N 0.18–0.25,Cu 0.75
ASTM A182 F50	0.03	2	1	0.045	0.03	24.0–26.0	5.5–6.5	1.20–2.00	–	N 0.14–0.20
ASTM A182 F51	0.03	2	1	0.03	0.02	21.0–23.0	4.5–6.5	2.5–3.5	–	N 0.08–0.20
ASTM A182 F52	0.03	2	0.6	0.035	0.01	26.0–29.0	3.5–5.2	1.00–2.50	–	N 0.15–0.35
ASTM A182 F53	0.03	1.2	0.8	0.035	0.02	24.0–26.0	6.0–8.0	3.0–5.0	–	N 0.24–0.32,Cu 0.50
ASTM A182 F54	0.03	1	0.8	0.03	0.02	24.0–26.0	6.0–8.0	2.5–3.5	–	N 0.24–0.32,Cu 0.20–0.80,W 1.50–2.50
ASTM A182 F55	0.03	1	1	0.03	0.01	24.0–26.0	6.0–8.0	3.0–4.0	–	N 0.20–0.30,Cu 0.50–1.00,W 0.50–1.00M
ASTM A182 F57	0.025	0.8	0.8	0.025	0.002	24.0–26.0	6.5–8.0	3.0–4.0	–	Cu 1.20–2.00, W 0.80–1.20,N 0.23–0.33
ASTM A182 F59	0.03	1.5	0.8	0.035	0.02	24.0–26.0	5.5–8.0	3.0–5.0	–	N 0.20–0.35,Cu 0.50–3.00
ASTM A182 F60	0.03	2	1	0.03	0.02	22.0–23.0	4.5–6.5	3.0–3.5	–	N 0.14–0.20
ASTM A182 F61	0.04	1.5	1	0.04	0.03	24.0–27.0	4.5–6.5	2.9–3.9	–	Cu 1.50–2.50,N 0.10–0.25
ASTM A182 F904L	0.02	2	1	0.04	0.03	19.0–23.0	23.0–28.0	4.0–5.0	–	Cu 1.00–2.00, N 0.10
ASTM29 1005	0.06 max	0.35 max	–	0.04	0.05	–	–		–	–
ASTM29 1006	0.08 max	0.25–0.40	–	0.04	0.05	–	–	–	–	–
ASTM29 1008	0.10 max	0.30–0.50	–	0.04	0.05	–	–	–	–	–
ASTM29 1010	0.08–0.13	0.30–0.60	–	0.04	0.05	–	–	–	–	–
ASTM29 1011	0.08–0.13	0.60–0.90	–	0.04	0.05	–	–	–	–	–
ASTM29 1012	0.10–0.15	0.30–0.60	–	0.04	0.05	–	–	–	–	–
ASTM29 1013	0.11–0.16	0.50–0.80	–	0.04	0.05	–	–	–	–	–
ASTM29 1015	0.13–0.18	0.30–0.60	–	0.04	0.05	–	–	–	–	–
ASTM29 1016	0.13–0.18	0.60–0.90	–	0.04	0.05	–	–	–	–	–
ASTM29 1017	0.15–0.20	0.30–0.60	–	0.04	0.05	–	–	–	–	–
ASTM29 1018	0.15–0.20	0.60–0.90	–	0.04	0.05	–	–	–	–	–
ASTM29 1019	0.15–0.20	0.70–1.00	–	0.04	0.05	–	–	–	–	–
ASTM29 1020	0.18–0.23	0.30–0.60	–	0.04	0.05	–	–	–	–	–
ASTM29 1021	0.18–0.23	0.60–0.90	–	0.04	0.05	–	–	–	–	–
ASTM29 1022	0.18–0.23	0.70–1.00	–	0.04	0.05	–	–	–	–	–
ASTM29 1023	0.20–0.25	0.30–0.60	–	0.04	0.05	–	–	–	–	–
ASTM29 1025	0.22–0.28	0.30–0.60	–	0.04	0.05	–	–	–	–	–
ASTM29 1026	0.22–0.28	0.60–0.90	–	0.04	0.05	–	–	–	–	–
ASTM29 1029	0.25–0.31	0.60–0.90	–	0.04	0.05	–	–	–	–	–
ASTM29 1030	0.28–0.34	0.60–0.90	–	0.04	0.05	–	–	–	–	–
ASTM29 1034	0.32–0.38	0.50–0.80	–	0.04	0.05	–	–	–	–	–
ASTM29 1035	0.32–0.38	0.60–0.90	–	0.04	0.05	–	–	–	–	–
ASTM29 1037	0.32–0.38	0.70–1.00	–	0.04	0.05	–	–	–	–	–
ASTM29 1038	0.35–0.42	0.60–0.90	–	0.04	0.05	–	–	–	–	–
ASTM29 1039	0.37–0.44	0.70–1.00	–	0.04	0.05	–	–	–	–	–
ASTM29 1040	0.37–0.44	0.60–0.90	–	0.04	0.05	–	–	–	–	–
ASTM29 1042	0.40–0.47	0.60–0.90	–	0.04	0.05	–	–	–	–	–
ASTM29 1043	0.40–0.47	0.70–1.00	–	0.04	0.05	–	–	–	–	–
ASTM29 1044	0.43–0.50	0.30–0.60	–	0.04	0.05	–	–	–	–	–
ASTM29 1045	0.43–0.50	0.60–0.90	–	0.04	0.05	–	–	–	–	–
ASTM29 1046	0.43–0.50	0.70–1.00	–	0.04	0.05	–	–	–	–	–
ASTM29 1049	0.46–0.53	0.60–0.90	–	0.04	0.05	–	–	–	–	–
ASTM29 1050	0.48–0.55	0.60–0.90	–	0.04	0.05	–	–	–	–	–
ASTM29 1053	0.48–0.55	0.70–1.00	–	0.04	0.05	–	–	–	–	–
ASTM29 1055	0.50–0.60	0.60–0.90	–	0.04	0.05	–	–	–	–	–
ASTM29 1059	0.55–0.65	0.50–0.80	–	0.04	0.05	–	–	–	–	–
ASTM29 1060	0.55–0.65	0.60–0.90	–	0.04	0.05	–	–	–	–	–
ASTM29 1064	0.60–0.70	0.50–0.80	–	0.04	0.05	–	–	–	–	–
ASTM29 1065	0.60–0.70	0.60–0.90	–	0.04	0.05	–	–	–	–	–
ASTM29 1069	0.65–0.75	0.40–0.70	–	0.04	0.05	–	–	–	–	–
ASTM29 1070	0.65–0.75	0.60–0.90	–	0.04	0.05	–	–	–	–	–
ASTM29 1071	0.65–0.70	0.75–1.05	–	0.04	0.05	–	–	–	–	–
ASTM29 1074	0.70–0.80	0.50–0.80	–	0.04	0.05	–	–	–	–	–
ASTM29 1075	0.70–0.80	0.40–0.70	–	0.04	0.05	–	–	–	–	–
ASTM29 1078	0.72–0.85	0.30–0.60	–	0.04	0.05	–	–	–	–	–
ASTM29 1080	0.75–0.88	0.60–0.90	–	0.04	0.05	–	–	–	–	–
ASTM29 1084	0.80–0.93	0.60–0.90	–	0.04	0.05	–	–	–	–	–
ASTM29 1086	0.80–0.93	0.30–0.50	–	0.04	0.05	–	–	–	–	–
ASTM29 1090	0.85–0.98	0.60–0.90	–	0.04	0.05	–	–	–	–	–
ASTM29 1095	0.90–1.03	0.30–0.50	–	0.04	0.05	–	–	–	–	–
ASTM29 1108	0.08–0.13	0.60–0.80	–	0.04	0.08–0.13	–	–	–	–	–
ASTM29 1109	0.08–0.13	0.60–0.90	–	0.04	0.08–0.13	–	–	–	–	–
ASTM29 1110	0.08–0.13	0.30–0.60	–	0.04	0.08–0.13	–	–	–	–	–
ASTM29 1116	0.14–0.20	1.10–1.40	–	0.04	0.16–0.23	–	–	–	–	–
ASTM29 1117	0.14–0.20	1.00–1.30	–	0.04	0.08–0.13	–	–	–	–	–
ASTM29 1118	0.14–0.20	1.30–1.60	–	0.04	0.08–0.13	–	–	–	–	–
ASTM29 1119	0.14–0.20	1.00–1.30	–	0.04	0.24–0.33	–	–	–	–	–
ASTM29 1132	0.27–0.34	1.35–1.65	–	0.04	0.08–0.13	–	–	–	–	–
ASTM29 1137	0.32–0.39	1.35–1.65	–	0.04	0.08–0.13	–	–	–	–	–
ASTM29 1139	0.35–0.43	1.35–1.65	–	0.04	0.13–0.20	–	–	–	–	–
ASTM29 1140	0.37–0.44	0.70–1.00	–	0.04	0.08–0.13	–	–	–	–	–
ASTM29 1141	0.37–0.45	1.35–1.65	–	0.04	0.08–0.13	–	–	–	–	–
ASTM29 1144	0.40–0.48	1.35–1.65	–	0.04	0.24–0.33	–	–	–	–	–
ASTM29 1145	0.42–0.49	0.70–1.00	–	0.04	0.04–0.07	–	–	–	–	–
ASTM29 1146	0.42–0.49	0.70–1.00	–	0.04	0.08–0.13	–	–	–	–	–
ASTM29 1151	0.48–0.55	0.70–1.00	–	0.04	0.08–0.13	–	–	–	–	–
ASTM29 1211	0.13 max	0.60–0.90	–	0.07–0.12	0.10–0.15	–	–	–	–	–
ASTM29 1212	0.13 max	0.70–1.00	–	0.07–0.12	0.16–0.23	–	–	–	–	–
ASTM29 1213	0.13 max	0.70–1.00	–	0.07–0.12	0.24–0.33	–	–	–	–	–
ASTM29 1215	0.09 max	0.75–1.05	–	0.04–0.09	0.26–0.35	–	–	–	–
ASTM29 12L13	0.13 max	0.70–1.00	–	0.07–0.12	0.24–0.33	–	–	–	–	0.15–0.35(Lead)
ASTM29 12L14	0.15 max	0.85–1.15	–	0.04–0.09	0.26–0.35	–	–	–	–	0.15–0.35(Lead)
ASTM29 12L15	0.09 max	0.75–1.05	–	0.04–0.09	0.26–0.35	–	–	–	–	0.15–0.35(Lead)
ASTM29 1513	0.10–0.16	1.10–1.40	–	0.04	0.05	–	–	–	–	–
ASTM29 1518	0.15–0.21	1.10–1.40	–	0.04	0.05	–	–	–	–	–
ASTM29 1522	0.18–0.24	1.10–1.40	–	0.04	0.05	–	–	–	–	–
ASTM29 1524	0.19–0.25	1.35–1.65	–	0.04	0.05	–	–	–	–	–
ASTM29 1525	0.23–0.29	0.80–1.10	–	0.04	0.05	–	–	–	–	–
ASTM29 1526	0.22–0.29	1.10–1.40	–	0.04	0.05	–	–	–	–	–
ASTM29 1527	0.22–0.29	1.20–1.50	–	0.04	0.05	–	–	–	–	–
ASTM29 1536	0.30–0.37	1.20–1.50	–	0.04	0.05	–	–	–	–	–
ASTM29 1541	0.36–0.44	1.35–1.65	–	0.04	0.05	–	–	–	–	–
ASTM29 1547	0.43–0.51	1.35–1.65	–	0.04	0.05	–	–	–	–	–
ASTM29 1548	0.44–0.52	1.10–1.40	–	0.04	0.05	–	–	–	–	–
ASTM29 1551	0.45–0.56	0.85–1.15	–	0.04	0.05	–	–	–	–	–
ASTM29 1552	0.47–0.55	1.20–1.50	–	0.04	0.05	–	–	–	–	–
ASTM29 1561	0.55–0.65	0.75–1.05	–	0.04	0.05	–	–	–	–	–
ASTM29 1566	0.60–0.71	0.85–1.15	–	0.04	0.05	–	–	–	–	–
ASTM29 1572	0.65–0.76	1.00–1.30	–	0.04	0.05	–	–	–	–	–
ASTM29 M1008	0.10 max	0.25–0.60	–	0.04	0.05	–	–	–	–	–
ASTM29 M1010	0.07–0.14	0.25–0.60	–	0.04	0.05	–	–	–	–	–
ASTM29 M1012	0.09–0.16	0.25–0.60	–	0.04	0.05	–	–	–	–	–
ASTM29 M1015	0.12–0.19	0.25–0.60	–	0.04	0.05	–	–	–	–	–
ASTM29 M1017	0.14–0.21	0.25–0.60	–	0.04	0.05	–	–	–	–	–
ASTM29 M1020	0.17–0.24	0.25–0.60	–	0.04	0.05	–	–	–	–	–
ASTM29 M1023	0.19–0.27	0.25–0.60	–	0.04	0.05	–	–	–	–	–
ASTM29 M1025	0.20–0.30	0.25–0.60	–	0.04	0.05	–	–	–	–	–
ASTM29 M1031	0.26–0.36	0.25–0.60	–	0.04	0.05	–	–	–	–	–
ASTM29 M1044	0.40–0.50	0.25–0.60	–	0.04	0.05	–	–	–	–	–
ASTM29 1330	0.28–0.33	1.60–1.90	0.15 to 0.35	0.035	0.04	–	–	–	–	–
ASTM29 1335	0.33–0.38	1.60–1.90	0.15 to 0.35	0.035	0.04	–	–	–	–	–
ASTM29 1340	0.38–0.43	1.60–1.90	0.15 to 0.35	0.035	0.04	–	–	–	–	–
ASTM29 1345	0.43–0.48	1.60–1.90	0.15 to 0.35	0.035	0.04	–	–	–	–	–
ASTM29 4012	0.09–0.14	0.75–1.00	0.15 to 0.35	0.035	0.04	–	–	0.15–0.25	–	–
ASTM29 4023	0.20–0.25	0.70–0.90	0.15 to 0.35	0.035	0.04	–	–	0.20–0.30	–	–
ASTM29 4024	0.20–0.25	0.70–0.90	0.15 to 0.35	0.035	0.035–0.050	–	–	0.20–0.30	–	–
ASTM29 4027	0.25–0.30	0.70–0.90	0.15 to 0.35	0.035	0.04	–	–	0.20–0.30	–	–
ASTM29 4028	0.25–0.30	0.70–0.90	0.15 to 0.35	0.035	0.035–0.050	–	–	0.20–0.30	–	–
ASTM29 4032	0.30–0.35	0.70–0.90	0.15 to 0.35	0.035	0.04	–	–	0.20–0.30	–	–
ASTM29 4037	0.35–0.40	0.70–0.90	0.15 to 0.35	0.035	0.04	–	–	0.20–0.30	–	–
ASTM29 4042	0.40–0.45	0.70–0.90	0.15 to 0.35	0.035	0.04	–	–	0.20–0.30	–	–
ASTM29 4047	0.45–0.50	0.70–0.90	0.15 to 0.35	0.035	0.04	–	–	0.20–0.30	–	–
ASTM29 4118	0.18–0.23	0.70–0.90	0.15 to 0.35	0.035	0.04	0.40–0.60	–	0.08–0.15	–	–
ASTM29 4120	0.18–0.23	0.90–1.20	0.15 to 0.35	0.035	0.04	0.40–0.60	–	0.13–0.20	–	–
ASTM29 4121	0.18–0.23	0.75–1.00	0.15 to 0.35	0.035	0.04	0.45–0.65	–	0.20–0.30	–	–
ASTM29 4130	0.28–0.33	0.40–0.60	0.15 to 0.35	0.035	0.04	0.80–1.10	–	0.15–0.25	–	–
ASTM29 4135	0.33–0.38	0.70–0.90	0.15 to 0.35	0.035	0.04	0.80–1.10	–	0.15–0.25	–	–
ASTM29 4137	0.35–0.40	0.70–0.90	0.15 to 0.35	0.035	0.04	0.80–1.10	–	0.15–0.25	–	–
ASTM29 4140	0.38–0.43	0.75–1.00	0.15 to 0.35	0.035	0.04	0.80–1.10	–	0.15–0.25	–	–
ASTM29 4142	0.40–0.45	0.75–1.00	0.15 to 0.35	0.035	0.04	0.80–1.10	–	0.15–0.25	–	–
ASTM29 4145	0.43–0.48	0.75–1.00	0.15 to 0.35	0.035	0.04	0.80–1.10	–	0.15–0.25	–	–
ASTM29 4147	0.45–0.50	0.75–1.00	0.15 to 0.35	0.035	0.04	0.80–1.10	–	0.15–0.25	–	–
ASTM29 4150	0.48–0.53	0.75–1.00	0.15 to 0.35	0.035	0.04	0.80–1.10	–	0.15–0.25	–	–
ASTM29 4161	0.56–0.64	0.75–1.00	0.15 to 0.35	0.035	0.04	0.70–0.90	–	0.25–0.35	–	–
ASTM29 4320	0.17–0.22	0.45–0.65	0.15 to 0.35	0.035	0.04	0.40–0.60	1.65–2.00	0.20–0.30	–	–
ASTM29 4340	0.38–0.43	0.60–0.80	0.15 to 0.35	0.035	0.04	0.70–0.90	1.65–2.00	0.20–0.30	–	–
ASTM29 E4340	0.38–0.43	0.65–0.85	0.15 to 0.35	0.025	0.025	0.70–0.90	1.65–2.00	0.20–0.30	–	–
ASTM29 4419	0.18–0.23	0.45–0.65	0.15 to 0.35	0.035	0.04	–	–	0.45–0.60	–	–
ASTM29 4422	0.20–0.25	0.70–0.90	0.15 to 0.35	0.035	0.04	–	–	0.35–0.45	–	–
ASTM29 4427	0.24–0.29	0.70–0.90	0.15 to 0.35	0.035	0.04	–	–	0.35–0.45	–	–
ASTM29 4615	0.13–0.18	0.45–0.65	0.15 to 0.35	0.035	0.04	–	1.65–2.00	0.20–0.30	–	–
ASTM29 4620	0.17–0.22	0.45–0.65	0.15 to 0.35	0.035	0.04	–	1.65–2.00	0.20–0.30	–	–
ASTM29 4621	0.18–0.23	0.70–0.90	0.15 to 0.35	0.035	0.04	–	1.65–2.00	0.20–0.30	–	–
ASTM29 4626	0.24–0.29	0.45–0.65	0.15 to 0.35	0.035	0.04	–	0.70–1.00	0.15–0.25	–	–
ASTM29 4715	0.13–0.18	0.70–0.90	0.15 to 0.35	0.035	0.04	0.45–0.65	0.70–1.00	0.45–0.60	–	–
ASTM29 4718	0.16–0.21	0.70–0.90	0.15 to 0.35	0.035	0.04	0.35–0.55	0.90–1.20	0.30–0.40	–	–
ASTM29 4720	0.17–0.22	0.50–0.70	0.15 to 0.35	0.035	0.04	0.35–0.55	0.90–1.20	0.15–0.25	–	–
ASTM29 4815	0.13–0.18	0.40–0.60	0.15 to 0.35	0.035	0.04	–	3.25–3.75	0.20–0.30	–	–
ASTM29 4817	0.15–0.20	0.40–0.60	0.15 to 0.35	0.035	0.04	–	3.25–3.75	0.20–0.30	–	–
ASTM29 4820	0.18–0.23	0.50–0.70	0.15 to 0.35	0.035	0.04	–	3.25–3.75	0.20–0.30	–	–
ASTM29 5015	0.12–0.17	0.30–0.50	0.15 to 0.35	0.035	0.04	0.30–0.50	–	–	–	–
ASTM29 5046	0.43–0.48	0.75–1.00	0.15 to 0.35	0.035	0.04	0.20–0.35	–	–	–	–
ASTM29 5115	0.13–0.18	0.70–0.90	0.15 to 0.35	0.035	0.04	0.70–0.90	–	–	–	–
ASTM29 5120	0.17–0.22	0.70–0.90	0.15 to 0.35	0.035	0.04	0.70–0.90	–	–	–	–
ASTM29 5130	0.28–0.33	0.70–0.90	0.15 to 0.35	0.035	0.04	0.80–1.10	–	–	–	–
ASTM29 5132	0.30–0.35	0.60–0.80	0.15 to 0.35	0.035	0.04	0.75–1.00	–	–	–	–
ASTM29 5135	0.33–0.38	0.60–0.80	0.15 to 0.35	0.035	0.04	0.80–1.05	–	–	–	–
ASTM29 5140	0.38–0.43	0.70–0.90	0.15 to 0.35	0.035	0.04	0.70–0.90	–	–	–	–
ASTM29 5145	0.43–0.48	0.70–0.90	0.15 to 0.35	0.035	0.04	0.70–0.90	–	–	–	–
ASTM29 5147	0.46–0.51	0.70–0.95	0.15 to 0.35	0.035	0.04	0.85–1.15	–	–	–	–
ASTM29 5150	0.48–0.53	0.70–0.90	0.15 to 0.35	0.035	0.04	0.70–0.90	–	–	–	–
ASTM29 5155	0.51–0.59	0.70–0.90	0.15 to 0.35	0.035	0.04	0.70–0.90	–	–	–	–
ASTM29 5160	0.56–0.61	0.75–1.00	0.15 to 0.35	0.035	0.04	0.70–0.90	–	–	–	–
ASTM29 E50100	0.98–1.10	0.25–0.45	0.15 to 0.35	0.035	0.04	0.40–0.60	–	–	–	–
ASTM29 E51100	0.98–1.10	0.25–0.45	0.15 to 0.35	0.035	0.04	0.90–1.15	–	–	–	–
ASTM29 E52100	0.98–1.10	0.25–0.45	0.15 to 0.35	0.035	0.04	1.30–1.60	–	–	–	–
ASTM29 52100B	0.93–1.05	0.25–0.45	0.15 to 0.35	0.035	0.04	1.35–1.60	–	–	–	–
ASTM29 6118	0.16–0.21	0.50–0.70	0.15 to 0.35	0.035	0.04	0.50–0.70	–	–	0.10–0.15	–
ASTM29 6150	0.48–0.53	0.70–0.90	0.15 to 0.35	0.035	0.04	0.80–1.10	–	–	0.15 min	–
ASTM29 8115	0.13–0.18	0.70–0.90	0.15 to 0.35	0.035	0.04	0.30–0.50	0.20–0.40	0.08–0.15		–
ASTM29 8615	0.13–0.18	0.70–0.90	0.15 to 0.35	0.035	0.04	0.40–0.60	0.40–0.70	0.15–0.25	–	–
ASTM29 8617	0.15–0.20	0.70–0.90	0.15 to 0.35	0.035	0.04	0.40–0.60	0.40–0.70	0.15–0.25	–	–
ASTM29 8620	0.18–0.23	0.70–0.90	0.15 to 0.35	0.035	0.04	0.40–0.60	0.40–0.70	0.15–0.25	–	–
ASTM29 8622	0.20–0.25	0.70–0.90	0.15 to 0.35	0.035	0.04	0.40–0.60	0.40–0.70	0.15–0.25	–	–
ASTM29 8625	0.23–0.28	0.70–0.90	0.15 to 0.35	0.035	0.04	0.40–0.60	0.40–0.70	0.15–0.25	–	–
ASTM29 8627	0.25–0.30	0.70–0.90	0.15 to 0.35	0.035	0.04	0.40–0.60	0.40–0.70	0.15–0.25	–	–
ASTM29 8630	0.28–0.33	0.70–0.90	0.15 to 0.35	0.035	0.04	0.40–0.60	0.40–0.70	0.15–0.25	–	–
ASTM29 8637	0.35–0.40	0.75–1.00	0.15 to 0.35	0.035	0.04	0.40–0.60	0.40–0.70	0.15–0.25	–	–
ASTM29 8640	0.38–0.43	0.75–1.00	0.15 to 0.35	0.035	0.04	0.40–0.60	0.40–0.70	0.15–0.25	–	–
ASTM29 8642	0.40–0.45	0.75–1.00	0.15 to 0.35	0.035	0.04	0.40–0.60	0.40–0.70	0.15–0.25	–	–
ASTM29 8645	0.43–0.48	0.75–1.00	0.15 to 0.35	0.035	0.04	0.40–0.60	0.40–0.70	0.15–0.25	–	–
ASTM29 8650	0.48–0.53	0.75–1.00	0.15 to 0.35	0.035	0.04	0.40–0.60	0.40–0.70	0.15–0.25	–	–
ASTM29 8655	0.51–0.59	0.75–1.00	0.15 to 0.35	0.035	0.04	0.40–0.60	0.40–0.70	0.15–0.25	–	–
ASTM29 8660	0.56–0.64	0.75–1.00	0.15 to 0.35	0.035	0.04	0.40–0.60	0.40–0.70	0.15–0.25	–	–
ASTM29 8720	0.18–0.23	0.70–0.90	0.15 to 0.35	0.035	0.04	0.40–0.60	0.40–0.70	0.20–0.30	–	–
ASTM29 8740	0.38–0.43	0.75–1.00	0.15 to 0.35	0.035	0.04	0.40–0.60	0.40–0.70	0.20–0.30	–	–
ASTM29 8822	0.20–0.25†	0.75–1.00	0.15 to 0.35	0.035	0.04	0.40–0.60	0.40–0.70	0.30–0.40	–	–
ASTM29 9254	0.51–0.59	0.60–0.80	1.20–1.60	0.035	0.04	0.60–0.80	–	–	–	–
ASTM29 9255	0.51–0.59	0.70–0.95	1.80–2.20	0.035	0.04	–	–	–	–	–
ASTM29 9259	0.56–0.64	0.75–1.00	0.70–1.10	0.035	0.04	0.45–0.65	–	–	–	–
ASTM29 9260	0.56–0.64	0.75–1.00	1.80–2.20	0.035	0.04	–	–	–	–	–
ASTM29 E9310	0.08–0.13	0.45–0.65	0.15 to 0.30	0.025	0.025	1.00–1.40	3.00–3.50	0.08–0.15	–	–
ASTM29 50B44	0.43–0.48	0.28–0.33	0.15 to 0.30	0.035	0.04	0.20–0.60	–	–	–	–
ASTM29 50B46	0.44–0.49	0.75–1.00	0.15 to 0.30	0.035	0.04	0.20–0.35	–	–	–	–
ASTM29 50B50	0.48–0.53	0.75–1.00	0.15 to 0.30	0.035	0.04	0.40–0.60	–	–	–	–
ASTM29 50B60	0.56–0.64	0.75–1.00	0.15 to 0.30	0.035	0.04	0.40–0.60	–	–	–	–
ASTM29 51B60	0.56–0.64	0.75–1.00	0.15 to 0.30	0.035	0.04	0.70–0.90	–	–	–	–
ASTM29 81B45	0.43–0.48	0.75–1.00	0.15 to 0.30	0.035	0.04	0.30–0.50	0.20–0.40	0.08–0.15	–	–
ASTM29 94B17	0.15–0.20	0.75–1.00	0.15 to 0.30	0.035	0.04	0.30–0.50	0.30–0.60	0.08–0.15	–	–
ASTM29 94B30	0.28–0.33	0.75–1.00	0.15 to 0.30	0.035	0.04	0.30–0.50	0.30–0.60	0.08–0.15	–	–

Chemical Composition of Alloy Steel & Carbon Steel - Round Bars, Flat Bars, Hex Bars & Square Bars

Grades Available

Chemical Composition / Data sheets for some common grades available in India.