BS 3059-2 Grade 360 Carbon Steel Seamless Tubes are also known as mild steel pipes and tubes.BS 3059-2 Grade 360 Tubes are low-cost Low Carbon Steel Tubes with max 017 % carbon content with combination of 040-080 % manganese easy to form and shape .These pipes are manufactured as per BS Specification and commercially referred as cs pipes or ms pipes.Low Carbon Steel Pipes are not as hard as carbon steel pipes, Though carburizing can increase its surface hardness.
BS 3059-2:1990 requirements for tubes not exceeding 127 mm outside diameter and 12.5 mm thickness. Depending on the operating temperature, it can be divided into two kinds general boiler pipes and high-pressure boiler pipes.
The method of manufacturing boiler tube is the same with seamless steel pipe,but this pipe has a requirement of the steel grades. Depending on the operating temperature, it can be divided into two kinds: general boiler pipes and high-pressure boiler pipes.
BS 3059-2 Grade 360 Specifications:
- Standard: BS 3059 Part II
- Steel Grade: Gr.360
- Outside Diameter: 5-90 mm
- Wall Thickness: 0.5-15 mm
Application of BS 3059 Part 2 Gr. 360 Boiler tubes :
- For operation of steam locomotives
- In small factories and industrial processes
- For home heating systems
- Chemical processing divisions
- Pulp and Paper manufacturing plants
- Refining units
Application Industry for BS 3059 Part 2 Gr. 360 Boiler tubes :
- Refining
- Refrigeration
- Petrochemical
- Gas transmission
- Pulp and paper
- Heating and Air Conditioning
- Chemical & Electric Power
- Boiler
- Heat Exchanger
- Cooling Plant
Dimension & Characteristics of BS 3059 Part 2 Gr. 360 Boiler tubes :
Chemical Composition / Chemistry of BS 3059 part 2 Grade 360 ERW Boiler Tubes
Standard | C | Mn | P | S | Si | Cr | Mo |
BS3059-II 360 | <=0.17 | 0.40-0.80 | <=0.035 | <=0.035 | 0.10-0.35 | - | - |
Mechanical Properties of BS 3059 part 2 Grade 360 ERW Boiler Tubes
Grade | Tensile Strength (MPa) | Yield Strength (Mpa Min) | Elongation (% Min) | Flatten Coefficient |
360 | 360~500 | 235 | 24 | 0.1 |
BS | BS3059 | ASTM/ASME | ASTM/ASME A53 |
BS1387 | ASTM/ASME A106 | ||
DIN | DIN1629 | ASTM/ASME A179 | |
DIN2391 | ASTM/ASME A192 | ||
DIN2448 | ASTM/ASME A210 | ||
DIN17175 | ASTM/ASME A213 | ||
DIN17456 | ASTM/ASME A249 | ||
DIN17458 | ASTM/ASME A269 | ||
JIS | JIS G3444 | ASTM/ASME A312 | |
JIS G3445 | ASTM/ASME A333 | ||
JIS G3456 | ASTM/ASME A334 | ||
JIS G3459 | ASTM/ASME A335 | ||
JIS G3461 | ASTM/ASME A500 | ||
EN | EN 10216-1 | ASTM/ASME A519 | |
EN 10216-2 | ASTM/ASME A556 |
BS 3059-2 Grade 360 specification Covers Steel boiler and super heater tubes. Specification for carbon, alloy and austenitic stainless steel tubes with specified elevated temperature properties. Our pipe are been supplied in both Plain Square cut, Deburred Ends or Bevelled End. This can be provided with Mill Standard Varnished, stencilled and bundle Strapped with end caps fitted. Each Bundle is packed according to the customer requirement for export orders.